---

Section 1: Product Identification
   Chemical Name:       Sodium hexafluorotitanate (IV), 98%    
   CAS Registry Number:       17116-13-1    
   Formula:       Na2TiF6    
   EINECS Number:       241-181-8    
   Chemical Family:       halometallate salts    
   Synonym:       Disodium hexafluorotitanate    

---

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title Compound       17116-13-1       100%       2.5mg/m3 (as F)       2.5mg/m3 (as F)    

---

Section 3: Hazards Identification
   Irritating to skin, eyes and respiratory tract. If inhaled or swallowed, this compound may cause fluoride
   Emergency Overview:
   poisoning. Early symptoms include nausea, vomiting, diarrhea, and weakness
   Primary Routes of Exposure:       Contact with skin and eyes. Inhalation of dust.    
   Eye Contact:       Causes irritation and serious eye damage. Effects may not immediately appear.    
   Causes irritation, with redness and pain. Soluble fluoride may be corrosive. Effects may not appear
   Skin Contact:
   immediately
   Inhalation of causes severe irritation to the respiratory tract, causing coughing, sore throat, and labored
   Inhalation:
   breathing.
   Ingestion:       May cause salivation, nausea, vomiting, diarrhea, and abdominal pain.    
   Irritating to skin, eyes and respiratory tract. Fluoride poisoning may cause nausea, vomiting, diarrhea,
   Acute Health Affects:
   weakness, coma, respiratory failure and cardiovascular collapse.
   Chronic Health Affects:       Prolonged exposure to hydrolysable fluorine compounds can cause deterioration of bone and tooth structure.    
   NTP:       No    
   IARC:       No    
   OSHA:       No    

---

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Apply calcium gluconate jelly
   Skin Exposure:
   or water soluble calcium salts as antidote. Seek medical assistance.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
   Inhalation:
   in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   Ingestion:
   vomiting only if directed by medical personnel.

---

SECTION 5: Fire Fighting Measures
   Flash Point:       not applicable    
   Autoignition Temperature:       none    
   Explosion Limits:       none    
   Extinguishing Medium:       None. Material is non-flammable.    
   Special Fire Fighting Procedures:       No special fire fighting procedures required.    
   Hazardous Combustion and       If involved in a fire this material may emit corrosive fumes of hydrofluoric acid.    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

---

SECTION 6: Accidental Release Measures
   Small spills can be mixed with powdered sodium bicarbonate, lime, or calcium carbonate and swept up. Avoid
   Spill and Leak Procedures:       raising dust. Spillage in areas not adequately ventilated may require an evacuation of area. Emergency    
   response teams will require self-contained breathing apparatus.

---

SECTION 7: Handling and Storage
   Handling and Storage:       Store in a tightly sealed non-glass container away from moisture.    

---

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove.    
   Ventilation:       The material must be handled in an efficient fume hood.    
   If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators
   Respirator:
   requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       The material must be handled in an efficient fume hood.    
   Additional Protection:       No additional protection required.    

---

SECTION 9: Physical and Chemical Properties
   Color and Form:       white pwdr.    
   Molecular Weight:       207.87    
   Melting Point:       no data    
   Boiling Point:       no data    
   Vapor Pressure:       no data    
   Specific Gravity:       no data    
   Odor:       none    
   Solubility in Water:       soluble    

---

SECTION 10: Stability and Reactivity
   Stability:       air and moisture stable    
   Hazardous Polymerization:       no hazardous polymerization    
   Conditions to Avoid:       none    
   Incompatibility:       active metals and strong mineral acids    
   Decomposition Products:       Hydrofluoric acid, metal fluorides and metal oxyfluorides    

---

SECTION 11: Toxicological Information
   RTECS Data:       No information available in the RTECS files.    
   Carcinogenic Effects:       no data    
   Mutagenic Effects:       no data    
   Tetratogenic Effects:       no data    

---

SECTION 12: Ecological Information
   Ecological Information:       No information available    

---

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to local, state and federal regulations.    

---

SECTION 14: Transportation
   Shipping Name (CFR):       Non-hazardous    
   Hazard Class (CFR):       NA    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       NA    
   UN ID Number (CFR):       NA    
   Shipping Name (IATA):       Non-hazardous    
   Hazard Class (IATA):       NA    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       NA    
   UN ID Number (IATA):       NA    

---

SECTION 15: Regulatory Information
   TSCA:       Not listed in the TSCA inventory.    
   SARA (Title 313):       Title compound not listed.    
   Second Ingredient:       none    

---

SECTION 16 - ADDITIONAL INFORMATION
N/A