聚醚酰亚胺

聚醚酰亚胺 基本信息
CAS号 61128-46-9 分子式 C37H28N2O8
分子量 628.62700 精确质量  628.18500
PSA  157.24000 LogP  8.23170

基本信息 展开↓

CAS号:
61128-46-9
分子式:
C37H28N2O8
分子量:
628.62700
中文名称:
聚醚酰亚胺
英文名称:
benzene-1,3-diamine,5-[4-[2-[4-[(1,3-dioxo-2-benzofuran-5-yl)oxy]phenyl]propan-2-yl]phenoxy]-2-benzofuran-1,3-dione
中文别名:
聚醚酰亚胺;
5,5-[(1-甲基亚乙基)双(4,1-亚苯氧基)]双-1,3-异苯并呋喃二酮与1,3-亚苯二胺的聚合物
英文别名:
benzene-1,3-diamine,5-[4-[2-[4-[(1,3-dioxo-2-benzofuran-5-yl)oxy]phenyl]propan-2-yl]phenoxy]-2-benzofuran-1,3-dione;
1,3-Isobenzofurandione,5,5'-((1-methylethylidene)bis(4,1-phenyleneoxy))bis-,polymer with 1,3-benzenediamine;
PEI;
5-[4-[2-[4-[(1,3-dioxo-2-benzofuran-5-yl)oxy]phenyl]propan-2-yl]phenoxy]-2-benzofuran-1,3-dione
精确分子量/精确质量:
628.18500
极性分子表面积/PSA:
157.24000
油水分配系数/LogP:

LogP值指的是某物质在正辛醇/水两相体系中的分配系数的对数值,反映了物质在油水两相中的分配情况。其中、LogP值越大,说明该物质越亲油;反之,LogP值越小,则说明该物质越亲水。
贝尔斯坦号/MDL:
MFCD00217701

物化性质展开↓

密度:
1.27 g/mL at 25ºC(lit.)
沸点:
712.3ºC at 760 mmHg
闪点:
302.2ºC
存储条件/存储方法:

 

保持贮藏器密封

放入紧密的贮藏器内,储存在阴凉,干燥的地方

稳定性相关:

 

遵照规定使用和储存则不会分解。

其它信息:

1.       性状:金色丸状

2.       密度(g/mL,25/4):1.27

3.       相对蒸汽密度(g/mL,空气=1):无可用

4.       熔点(ºC):无可用

5.       沸点(ºC,常压):无可用

6.       沸点(ºC,5.2kPa):无可用

7.       折射率:无可用

8.       闪点(ºC):无可用

9.       比旋光度(º):无可用

10.    自燃点或引燃温度(ºC):无可用

11.    蒸气压(kPa,25ºC):无可用

12.    饱和蒸气压(kPa,60ºC):无可用

13.    燃烧热(KJ/mol):无可用

14.    临界温度(ºC):无可用

15.    临界压力(KPa):无可用

16.    油水(辛醇/水)分配系数的对数值:无可用

17.    爆炸上限(%,V/V):无可用

18.    爆炸下限(%,V/V):无可用

19.    溶解性:无可用

毒理性展开↓

生态数据:

 

该物质对环境可能有危害,对水体应给予特别注意。

MSDS 展开↓


Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
    Product name        : Polyetherimide    

Section 2. HAZARDS IDENTIFICATION
  Classification of the substance or mixture
    Not a dangerous substance according to GHS.
    This substance is not classified as dangerous according to Directive 67/548/EEC.
  Label elements
    The product does not need to be labelled in accordance with EC directives or respective national laws.
  Other hazards - none

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
    Synonyms        : Poly(bisphenol A-co-4-nitrophthalic anhydride-co-1,3-phenylenediamine)    
    Polyetherimide
    Poly(ether imide)
    PEI
    Poly(bisphenol A anhydride-co-1,3-phenylenediamine)
    Poly-[2,2′bis(4-(3,4-dicarboxyphenoxy)phenylpropane)-1,3-phenylene
    bisimide]
    Poly(bisphenol A dianhydride-co-1,3-phenylenediamine)
    CAS-No.        EC-No.        Index-No.        Classification        Concentration    
  Polyetherimide
    61128-46-9        -        -        -        -    

Section 4. FIRST AID MEASURES
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration.
  In case of skin contact
    Wash off with soap and plenty of water.
  In case of eye contact
    Flush eyes with water as a precaution.
  If swallowed
    Never give anything by mouth to an unconscious person. Rinse mouth with water.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special protective equipment for fire-fighters
    Wear self contained breathing apparatus for fire fighting if necessary.

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions
    Avoid dust formation. Avoid breathing vapors, mist or gas.
  Environmental precautions
    Do not let product enter drains.
  Methods and materials for containment and cleaning up
    Sweep up and shovel. Keep in suitable, closed containers for disposal.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
    Provide appropriate exhaust ventilation at places where dust is formed. Normal measures for preventive fire
    protection.
  Conditions for safe storage
    Keep container tightly closed in a dry and well-ventilated place. Store in cool place.

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
  Personal protective equipment
  Respiratory protection
    Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use
    type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved
    under appropriate government standards such as NIOSH (US) or CEN (EU).
  Hand protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without
    touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves
    after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
    standard EN 374 derived from it.
  Eye protection
    Use equipment for eye protection tested and approved under appropriate government standards such as
    NIOSH (US) or EN 166(EU).
  Skin and body protection
    Choose body protection in relation to its type, to the concentration and amount of dangerous substances,
    and to the specific work-place., The type of protective equipment must be selected according to the
    concentration and amount of the dangerous substance at the specific workplace.
  Hygiene measures
    General industrial hygiene practice.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Appearance
    Form        pellets    
    Colour        gold    
  Safety data
    pH no data available
    Melting point        no data available    
    Boiling point        no data available    
    Flash point        no data available    
    Ignition temperature no data available
    Lower explosion limit no data available
    Upper explosion limit no data available
    Density        1,27 g/mL at 25 °C    
    Water solubility        no data available    

Section 10. STABILITY AND REACTIVITY
  Chemical stability
    Stable under recommended storage conditions.
  Conditions to avoid
    no data available
  Materials to avoid
    Strong oxidizing agents
  Hazardous decomposition products
    Hazardous decomposition products formed under fire conditions. - Nature of decomposition products not
    known.

Section 11. TOXICOLOGICAL INFORMATION
  Acute toxicity
    no data available
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitization
    no data available
  Germ cell mutagenicity
    no data available
  Carcinogenicity
    IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
    probable, possible or confirmed human carcinogen by IARC.
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
    no data available
  Potential health effects
  Inhalation        May be harmful if inhaled. May cause respiratory tract irritation.    
  Ingestion        May be harmful if swallowed.    
  Skin        May be harmful if absorbed through skin. May cause skin irritation.    
  Eyes
    May cause eye irritation.
  Signs and Symptoms of Exposure
    To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
    investigated.
  Additional Information
    RTECS: Not available

Section 12. ECOLOGICAL INFORMATION
  Toxicity
    no data available
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  PBT and vPvB assessment
    no data available
  Other adverse effects
    no data available

Section 13. DISPOSAL CONSIDERATIONS
  Product
    Offer surplus and non-recyclable solutions to a licensed disposal company.
  Contaminated packaging
    Dispose of as unused product.

Section 14. TRANSPORT INFORMATION
  ADR/RID
    Not dangerous goods
  IMDG
    Not dangerous goods
  IATA
    Not dangerous goods



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

分子结构与计算化学数据展开↓

计算化学数据


1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:2

3.氢键受体数量:10

4.可旋转化学键数量:6

5.互变异构体数量:无

6.拓扑分子极性表面积157

7.重原子数量:47

8.表面电荷:0

9.复杂度:962

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:2

立即下载安装“化学加”APP
专业、功能强大,随时调用更加方便