二羰基双(环戊二烯基)钛

二羰基双(环戊二烯基)钛 基本信息
CAS号 12129-51-0 分子式 C12H10O2Ti
分子量 234.07400 精确质量  234.01600
PSA  0.00000 LogP  1.62700

基本信息 展开↓

CAS号:
12129-51-0
分子式:
C12H10O2Ti
分子量:
234.07400
中文名称:
二羰基双(环戊二烯基)钛
英文名称:
bis(oxomethylidene)titanium,cyclopenta-1,3-diene
中文别名:
二羰基双(环戊二烯基)钛;
羰基双(环茂二烯基)钛
英文别名:
bis(oxomethylidene)titanium,cyclopenta-1,3-diene;
BIS(CYCLOPENTADIENYL)DICARBONYL TITANIUM;
BIS(CYCLOPENTADIENYL)DICARBONYL TITANIUM (II);
DICARBONYLBIS(CYCLOPENTADIENYL)TITANIUM(II);
DICYCLOPENTADIENYLDICARBONYL TITANIUM II;
Dicarbonylbis(cyclopentadienyl)titanium;
Dicarbonylbis(pi-cyclopentadienyl)titanium;
Dicarbonyldi(eta-cyclopentadienyl)titanium;
Dicarbonyldi-pi-cyclopentadienyltitanium
精确分子量/精确质量:
234.01600
极性分子表面积/PSA:
0.00000
油水分配系数/LogP:

LogP值指的是某物质在正辛醇/水两相体系中的分配系数的对数值,反映了物质在油水两相中的分配情况。其中、LogP值越大,说明该物质越亲油;反之,LogP值越小,则说明该物质越亲水。
贝尔斯坦号/MDL:
MFCD00143762

生产制备方法及用途展开↓

制备方法


在CO气氛下由二氯二茂钛与汞齐反应而来。

合成制备方法


在CO气氛下由二氯二茂钛与汞齐反应而来。

用途简介


二羰基二茂钛中钛的化合价为+2价,很容易失去两个电子变为更稳定的+4价钛,因此二羰基二茂钛具有还原活性,能够实现亚砜化合物的脱氧反应,芳基醛化合物的还原偶联反应以及实现炔烃的还原 。 二羰基二茂钛能够很容易实现亚砜化合物的脱氧反应,并且不会伴随有副产物,因而产率很高。通常,烷基和芳基亚砜在二羰基二茂钛的还原下能够获得产率80%以上的脱氧产物 (式1) 。 二羰基二茂钛还能实现芳基醛的还原偶联,高产率地得到二苯乙烯化合物 (式2) 。反应经历了pinacol中间体,在反应中也能够检测到少量的剩余pinacol副产物。 在二羰基二茂钛催化下,末端炔能够发生末端氢化反应得到末端烯烃,如1-戊炔能被还原为1-戊烯,1-己炔能被还原为1-己烯 (式3,式4) 。芳基炔在二羰基二茂钛催化下则能被还原为芳基乙烷,如苯乙炔被还原为苯基乙烷 (式5)。

用途


二羰基二茂钛中钛的化合价为+2价,很容易失去两个电子变为更稳定的+4价钛,因此二羰基二茂钛具有还原活性,能够实现亚砜化合物的脱氧反应,芳基醛化合物的还原偶联反应以及实现炔烃的还原[1]

二羰基二茂钛能够很容易实现亚砜化合物的脱氧反应,并且不会伴随有副产物,因而产率很高。通常,烷基和芳基亚砜在二羰基二茂钛的还原下能够获得产率80%以上的脱氧产物 (式1)[2]

二羰基二茂钛还能实现芳基醛的还原偶联,高产率地得到二苯乙烯化合物 (式2)[3]。反应经历了pinacol中间体,在反应中也能够检测到少量的剩余pinacol副产物。

在二羰基二茂钛催化下,末端炔能够发生末端氢化反应得到末端烯烃,如1-戊炔能被还原为1-戊烯,1-己炔能被还原为1-己烯 (式3,式4)[4]。芳基炔在二羰基二茂钛催化下则能被还原为芳基乙烷,如苯乙炔被还原为苯基乙烷 (式5)。

物化性质展开↓

熔点:
90ºC
沸点:
60ºC/0.001mm
闪点:
60°C/0.001mm subl.
存储条件/存储方法:

常温密闭避光,通风干燥处

稳定性相关:

1.常温常压下稳定

避免的物料 氧化物  水分/潮湿 热

2.可自燃,必须在惰性气氛下保存和操作使用。

其它信息:

1. 性状:未确定

2. 密度(g/mL,25℃):未确定

3. 相对蒸汽密度(g/mL,空气=1):未确定

4. 熔点(ºC):90

5. 沸点(ºC,常压):未确定

6. 沸点(ºC,0.001mmHg):60

7. 折射率:未确定

8. 闪点(ºC):未确定

9. 比旋光度(º):未确定

10. 自燃点或引燃温度(ºC):未确定

11. 蒸气压(20ºC):未确定

12. 饱和蒸气压(kPa,60ºC):未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC):未确定

15. 临界压力(KPa):未确定

16. 油水(辛醇/水)分配系数的对数值:未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V):未确定

19. 溶解性:溶于大多数有机溶剂,但会与氯仿和二氯甲烷反应。

安全信息展开↓

包装等级:
II
风险类别:
6.1
危险类别码:
20/21/22-36/37/38-40
安全说明:
26-36/37/39

毒理性展开↓

生态数据:

通常对水体是稍微有害的,不要将未稀释或大量产品接触地下水,水道或污水系统,未经政府许可勿将材料排入周围环境。

MSDS 展开↓


Section 1: Product Identification
   Chemical Name:       Bis(cyclopentadienyl)dicarbonyl titanium(II), min. 98%    
   CAS Registry Number:       12129-51-0    
   Formula:       (C5H5)2Ti(CO)2    
   EINECS Number:       none    
   Chemical Family:       metallocene    
   Titanium, bis[(1,2,3,4,5-.eta.)-2,4-cyclopentadiene-1-yl]dicarbonyl, Dicarbonylbiscyclopentadienyl titanium,
   Synonym:
   Titanocene dicarbonyl

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title Compound       12129-51-0       100%       no data       no data    

Section 3: Hazards Identification
   Emergency Overview:       No particular hazard associated with this material.    
   Primary Routes of Exposure:       Ingestion    
   Eye Contact:       May cause slight to mild irritation of the eyes.    
   Skin Contact:       May cause slight to mild irritation of the skin.    
   Inhalation:       May be irritating to the nose, mucous membranes and respiratory tract.    
   Ingestion:       No information on the physiological effects of ingestion.    
   Acute Health Affects:       May be irritating to skin, eyes and respiratory tract.    
   Chronic Health Affects:       No information available on long-term chronic effects.    
   NTP:       No    
   IARC:       No    
   OSHA:       No    

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
   Skin Exposure:
   irritation persists.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty in
   Inhalation:
   breathing, coughing, wheezing or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   Ingestion:
   vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
   Flash Point:       no data    
   Autoignition Temperature:       no data    
   Explosion Limits:       no data    
   Extinguishing Medium:       carbon dioxide or dry powder    
   If this product is involved in a fire, firefighters should be equipped with NIOSH approved positive pressure
   Special Fire Fighting Procedures:
   self-contained breathing apparatus.
   Hazardous Combustion and       If involved in a fire this product may emit toxic and corrosive fumes.    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: Flammable solid

SECTION 6: Accidental Release Measures
   Spill and Leak Procedures:       Remove sources of ignition. do not raise dust. sweep up the solids and dispose of properly.    

SECTION 7: Handling and Storage
   Handle and store the material under an inert atmosphere of nitrogen or argon. Keep away from heat and
   Handling and Storage:
   moisture.

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothing and gloves.    
   Ventilation:       If possible, handle the material in an efficient fume hood.    
   If ventilation is not available a respirator should be worn. The use of respirators requires a Respiratory
   Respirator:
   Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       If possible, handle the material in an efficient fume hood.    
   Additional Protection:       No additional protection required.    

SECTION 9: Physical and Chemical Properties
   Color and Form:       red xtl    
   Molecular Weight:       234.09    
   Melting Point:       no data    
   Boiling Point:       no data    
   Vapor Pressure:       no data    
   Specific Gravity:       no data    
   Odor:       not determined    
   Solubility in Water:       insoluble    

SECTION 10: Stability and Reactivity
   Stability:       air sensitive    
   Hazardous Polymerization:       No hazardous polymerization.    
   Conditions to Avoid:       none    
   Incompatibility:       oxidizing agent    
   Decomposition Products:       carbon monoxide, carbon dioxide, titanium oxide and organic fumes.    

SECTION 11: Toxicological Information
   RTECS Data:       No information available in the RTECS files.    
   Carcinogenic Effects:       no data    
   Mutagenic Effects:       no data    
   Tetratogenic Effects:       no data    

SECTION 12: Ecological Information
   Ecological Information:       No information available    

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to local, state and federal regulations.    

SECTION 14: Transportation
   Shipping Name (CFR):       Flammable solids, Organic, N.O.S.    
   Hazard Class (CFR):       4.1    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       II    
   UN ID Number (CFR):       UN# 1325    
   Shipping Name (IATA):       Flammable solid, Organic, N.O.S.    
   Hazard Class (IATA):       4.1    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       II    
   UN ID Number (IATA):       UN# 1325    

SECTION 15: Regulatory Information
   TSCA:       Not listed in the TSCA inventory.    
   SARA (Title 313):       Title compound not listed    
   Second Ingredient:       none    


SECTION 16 - ADDITIONAL INFORMATION
N/A

分子结构与计算化学数据展开↓

分子结构数据


1、摩尔折射率:无可用的

2、摩尔体积(cm3/mol):无可用的

3、等张比容(90.2K):无可用的

4、表面张力(dyne/cm):无可用的

5、介电常数:无可用的

6、极化率(10-24cm3):无可用的

7、单一同位素质量:234.016027 Da

8、标称质量:234 Da

9、平均质量:234.0736 Da

计算化学数据


1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:0

3.氢键受体数量:4

4.可旋转化学键数量:0

5.互变异构体数量:无

6.拓扑分子极性表面积34.1

7.重原子数量:15

8.表面电荷:-2

9.复杂度:333

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:3

立即下载安装“化学加”APP
专业、功能强大,随时调用更加方便