N1,n1-双(三甲基甲硅烷基)-1,4-丁二胺

N1,n1-双(三甲基甲硅烷基)-1,4-丁二胺 基本信息
CAS号 13435-07-9 分子式 C10H28N2Si2
分子量 232.51400 精确质量  232.17900
PSA  24.06000 LogP  3.39740

基本信息 展开↓

CAS号:
13435-07-9
3D弹球模型:
立即前往扯扯看
分子式:
C10H28N2Si2
分子量:
232.51400
中文名称:
N1,n1-双(三甲基甲硅烷基)-1,4-丁二胺
英文名称:
N,N'-bis(trimethylsilyl)butane-1,4-diamine
中文别名:
N1,n1-双(三甲基甲硅烷基)-1,4-丁二胺;
N,N'-双(三甲基硅基)-1,4-丁二胺
英文别名:
N,N'-bis(trimethylsilyl)butane-1,4-diamine;
N,N'-Bis-trimethylsilyl-tetramethylendiamin;
Bistrimethylsilylbutanediamine;
2,2,9,9-tetramethyl-3,8-diaza-2,9-disila-decane;
N,N'-Bis-trimethylsilyl-butandiyldiamin;
2,2,9,9-Tetramethyl-3,8-diaza-2,9-disila-decan
精确分子量/精确质量:
232.17900
极性分子表面积/PSA:
24.06000
油水分配系数/LogP:

LogP值指的是某物质在正辛醇/水两相体系中的分配系数的对数值,反映了物质在油水两相中的分配情况。其中、LogP值越大,说明该物质越亲油;反之,LogP值越小,则说明该物质越亲水。
InChI:
The Key: RGJRTSKMSWYFCI-UHFFFAOYSA-N

物化性质展开↓

密度:
0.825 g/cm3
沸点:
87-8ºC 4mm
闪点:
13ºC

安全信息展开↓

包装等级:
II
风险类别:
3.1
海关代码:
2931900090

合成路线查看所有的合成路线

  • 110-60-1

    1,4-二氨基丁烷

  • +

  • 996-50-9

    三甲基硅烷基二乙胺

  • ~97%

  • 13435-07-9

    N1,n1-双(三甲基甲硅烷基)-1,4-丁二胺

  • 75-77-4

    三甲基氯硅烷

  • +

  • 110-60-1

    1,4-二氨基丁烷

  • 13435-07-9

    N1,n1-双(三甲基甲硅烷基)-1,4-丁二胺

MSDS 展开↓


Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
  Product identifiers
    : N,N′-Bis(trimethylsilyl)-1,4-butanediamine
    Product name
    CAS-No.        : 13435-07-9    
  Relevant identified uses of the substance or mixture and uses advised against
    Identified uses        : Laboratory chemicals, Manufacture of substances    
  
  

Section 2. HAZARDS IDENTIFICATION
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
    Flammable liquids (Category 2)
    Skin corrosion (Category 1B)
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Highly flammable. Causes burns.
  Label elements
  Labelling according Regulation (EC) No 1272/2008 [CLP]
    Pictogram
    Signal word        Danger    
    Hazard statement(s)
    H225        Highly flammable liquid and vapour.    
    H314        Causes severe skin burns and eye damage.    
    Precautionary statement(s)
    P210        Keep away from heat/sparks/open flames/hot surfaces. - No smoking.    
    P280        Wear protective gloves/ protective clothing/ eye protection/ face    
    protection.
    P305 + P351 + P338        IF IN EYES: Rinse cautiously with water for several minutes. Remove    
    contact lenses, if present and easy to do. Continue rinsing.
    P310        Immediately call a POISON CENTER or doctor/ physician.    
    Supplemental Hazard        none    
    Statements
  According to European Directive 67/548/EEC as amended.
    Hazard symbol(s)
    R-phrase(s)
    R11        Highly flammable.    
    R34        Causes burns.    
    S-phrase(s)
    S16        Keep away from sources of ignition - No smoking.    
    S26        In case of contact with eyes, rinse immediately with plenty of water and    
    seek medical advice.
    S27        Take off immediately all contaminated clothing.    
    S36/37/39        Wear suitable protective clothing, gloves and eye/face protection.    
    S45        In case of accident or if you feel unwell, seek medical advice immediately    
    (show the label where possible).
  Other hazards - none

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substances
    Formula        : C10H28N2Si2    
    Molecular Weight        : 232,51 g/mol    
    Component        Concentration    
  N,N'-Bis(trimethylsilyl)-1,4-butanediamine
    CAS-No.        13435-07-9        -    

Section 4. FIRST AID MEASURES
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
    physician.
  In case of eye contact
    Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
  If swallowed
    Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
    water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and
    skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi,
    pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath,
    Headache, Nausea
  Indication of any immediate medical attention and special treatment needed
    no data available

Section 5. FIREFIGHTING MEASURES
  Extinguishing media
  Suitable extinguishing media
    For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large
    fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or
    spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of
    water.
  Special hazards arising from the substance or mixture
    Carbon oxides, nitrogen oxides (NOx), silicon oxides
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    Use water spray to cool unopened containers.

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions, protective equipment and emergency procedures
    Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
    Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
    form explosive concentrations. Vapours can accumulate in low areas.
  Environmental precautions
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
  Methods and materials for containment and cleaning up
    Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
    place in container for disposal according to local regulations (see section 13).
  Reference to other sections
    For disposal see section 13.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
    Avoid inhalation of vapour or mist.
    Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
    charge.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
    opened must be carefully resealed and kept upright to prevent leakage.
  Specific end use(s)
    no data available

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
    at the end of workday.
  Personal protective equipment
  Eye/face protection
    Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection
    tested and approved under appropriate government standards such as NIOSH (US) or EN
    166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
  Body Protection
    Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type
    of protective equipment must be selected according to the concentration and amount of the
    dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
    with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
    to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
    respirator. Use respirators and components tested and approved under appropriate government
    standards such as NIOSH (US) or CEN (EU).

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Information on basic physical and chemical properties
    a) Appearance        Form: liquid    
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        no data available    
    point
    f) Initial boiling point and 87 - 88 °C at 5 hPa
    boiling range
    g) Flash point        14 °C - closed cup    
    h) Evaporation rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        no data available    
    m) Relative density        0,825 g/cm3    
    n) Water solubility        no data available    
    o) Partition coefficient: n- no data available
    octanol/water
    p) Auto-ignition        no data available    
    temperature
    q) Decomposition        no data available    
    temperature
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    no data available

Section 10. STABILITY AND REACTIVITY
  Reactivity
    no data available
  Chemical stability
    no data available
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    Heat, flames and sparks. Extremes of temperature and direct sunlight.
  Incompatible materials
    Strong oxidizing agents, acids, Alcohols
  Hazardous decomposition products
    Other decomposition products - no data available

Section 11. TOXICOLOGICAL INFORMATION
  Information on toxicological effects
  Acute toxicity
    no data available
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitization
    no data available
  Germ cell mutagenicity
    no data available
  Carcinogenicity
    IARC:        No component of this product present at levels greater than or equal to 0.1% is identified as    
    probable, possible or confirmed human carcinogen by IARC.
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
    no data available
  Potential health effects
  Inhalation
    May be harmful if inhaled. Material is extremely destructive to the tissue of
    the mucous membranes and upper respiratory tract.
  Ingestion        May be harmful if swallowed. Causes burns.    
  Skin        May be harmful if absorbed through skin. Causes skin burns.    
  Eyes
    Causes eye burns.
  Signs and Symptoms of Exposure
    Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and
    skin., spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi,
    pneumonitis, pulmonary edema, burning sensation, Cough, wheezing, laryngitis, Shortness of breath,
    Headache, Nausea
  Additional Information
    RTECS: Not available

Section 12. ECOLOGICAL INFORMATION
  Toxicity
    no data available
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    no data available
  Other adverse effects
    no data available

Section 13. DISPOSAL CONSIDERATIONS
  Waste treatment methods
  Product
    Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
    as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
    company. Contact a licensed professional waste disposal service to dispose of this material.
  Contaminated packaging
    Dispose of as unused product.

Section 14. TRANSPORT INFORMATION
  UN number
    ADR/RID: 2733        IMDG: 2733        IATA: 2733    
  UN proper shipping name
    ADR/RID: POLYAMINES, FLAMMABLE, CORROSIVE, N.O.S. (N,N'-Bis(trimethylsilyl)-1,4-
    butanediamine)
    IMDG: POLYAMINES, FLAMMABLE, CORROSIVE, N.O.S. (N,N'-Bis(trimethylsilyl)-1,4-
    butanediamine)
    IATA:        Polyamines, flammable, corrosive, n.o.s. (N,N'-Bis(trimethylsilyl)-1,4-butanediamine)    
  Transport hazard class(es)
    ADR/RID: 3 (8)        IMDG: 3 (8)        IATA: 3 (8)    
  Packaging group
    ADR/RID: II        IMDG: II        IATA: II    
  Environmental hazards
    ADR/RID: no        IMDG Marine Pollutant: no        IATA: no    
  Special precautions for user
    no data available



SECTION 15 - REGULATORY INFORMATION
N/A


SECTION 16 - ADDITIONAL INFORMATION
N/A

海关数据查看详细

中国海关编码:2931900090

概述:
2931900090. 其他有机-无机化合物. 增值税率:17.0%. 退税率:13.0%. 监管条件:AB(入境货物通关单,出境货物通关单). 最惠国关税:6.5%. 普通关税:30.0%
摘要/Summary:
2931900090. other organo-inorganic compounds. VAT:17.0%. Tax rebate rate:13.0%. Supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward). MFN tariff:6.5%. General tariff:30.0%

上下游相关产品

上游产品

更多
  • 110-60-1

    1,4-二氨基丁烷

  • 996-50-9

    三甲基硅烷基二乙胺

  • 75-77-4

    三甲基氯硅烷

下游产品

更多
  • 31991-78-3

    N-(4-benzamidobutyl)benzamide

  • 3073-57-2

    (2β,3β,5β,14xi,22R)-22-(α-D-半乳吡喃糖氧基)-2,14,20,25-四羟基-6-羰基胆甾-7-烯-3-基α-D-吡喃半乳糖苷

立即下载安装“化学加”APP
专业、功能强大,随时调用更加方便