Amyltriethylammonium      Revision number: 1    
  Bis(trifluoromethanesulfonyl)imide
  SAFETY DATA SHEET

---

Section 1. BASE INFORMATION
  Product name:        Amyltriethylammonium Bis(trifluoromethanesulfonyl)imide    
             
  Revision number:        1    

---

Section 2. HAZARDS IDENTIFICATION
  Classification of the GHS
    Not classified
  PHYSICAL HAZARDS
  HEALTH HAZARDS
    Category 2
  Skin corrosion/irritation
  Serious eye damage/eye irritation        Category 2A    
    Not classified
  ENVIRONMENTAL HAZARDS
  GHS label elements
  Pictograms or hazard symbols
  Signal word        Warning    
    Causes skin irritation
  Hazard statement
    Causes serious eye irritation
  Precautionary statements
  [Prevention]        Wash hands thoroughly after handling.    
    Wear protective gloves/eye protection/face protection.
  [Response]        IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,    
    if present and easy to do. Continue rinsing.
    If eye irritation persists: Get medical advice/attention.
    IF ON SKIN: Gently wash with plenty of soap and water.
    If skin irritation occurs: Get medical advice/attention.
    Take off contaminated clothing and wash before reuse.

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
    Substance
  Substance/mixture:
  Component(s):        Amyltriethylammonium Bis(trifluoromethanesulfonyl)imide    
    >98.0%(N)
  Percent:
  CAS Number:        906478-91-9    
    Triethylpentylammonium Bis(trifluoromethanesulfonyl)imide
  Synonyms:
  Chemical Formula:        C13H26F6N2O4S2    

---

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention if you feel unwell.
  Amyltriethylammonium
  Bis(trifluoromethanesulfonyl)imide

---

Section 4. FIRST AID MEASURES
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Get medical advice/attention if you feel unwell. Rinse mouth.    
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

---

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, foam, water spray, carbon dioxide.    
  media:
  Specific hazards:        Take care as it may decompose upon combustion or in high temperatures to    
    generate poisonous fume.
  Specific methods:        Fire-extinguishing work is done from the windward and the suitable fire-extinguishing    
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

---

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use personal protective equipment. Keep people away from and upwind of spill/leak.    
  protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
  emergency procedures: around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
  containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
  up: material should be promptly disposed of, in accordance with appropriate laws and
    regulations.

---

Section 7. HANDLING AND STORAGE
  Handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapor or mist. Wash hands and face thoroughly after handling.
    Use a ventilation, local exhaust if vapor or aerosol will be generated.
  Advice on safe handling:        Avoid contact with skin, eyes and clothing.    
  Storage
  Storage conditions:        Keep container tightly closed. Store in a cool and dark place.    
    Store away from incompatible materials such as oxidizing agents.
  Packaging material:        Law is followed.    

---

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust as possible so that workers should not be    
    exposed directly. Also install safety shower and eye bath.
  Personal protective equipment
  Respiratory protection: Vapor respirator. Follow local and national regulations.
  Hand protection:        Protective gloves.    
  Eye protection:        Safety glasses. A face-shield, if the situation requires.    
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
    Liquid
  Physical state (20°C):
  Form:        clear    
  Color:        Pale yellow - Yellow    
  Amyltriethylammonium
  Bis(trifluoromethanesulfonyl)imide

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Odor:        No data available    
  pH: No data available
  Melting point/freezing point:No data available
  Boiling Point/Range:        No data available    
  Flash Point:        No data available    
  Explosive limits
  Lower:        No data available    
    No data available
  Upper:
  Density:        1.32    
  Solubility:        No data available    

---

Section 10. STABILITY AND REACTIVITY
  Stability:        Stable under proper conditions.    
  Reactivity:        No special reactivity has been reported.    
  Incompartible materials: oxidizing agents
  Hazardous Decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Hydrogen fluoride,
    Sulphur oxides
  Products:

---

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
    No data available
  NTP =
  Reproductive toxicity:        No data available    

---

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
  Crustacea:        No data available    
  Algae:        No data available    
  Persistence / degradability: No data available
    No data available
  Bioaccumulative
  potential(BCF):
  Mobillity in soil
  log Pow:        No data available    
  Soil adsorption (Koc):        No data available    
  Henry's Law        No data available    
  constant(PaM3/mol):

---

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. Observe all federal, state and local
    regulations when disposing of the substance.

---

Section 14. TRANSPORT INFORMATION
  Hazards Class:        Does not correspond to the classification standard of the United Nations    
  UN-No:        Not Listed    

---

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26,
  2002): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were
    prescribed.
  Amyltriethylammonium
  Bis(trifluoromethanesulfonyl)imide

---

SECTION 16 - ADDITIONAL INFORMATION
N/A