---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
  Product identifiers
    Product name        : Fluxofenim    
    CAS-No.        : 88485-37-4    
  Relevant identified uses of the substance or mixture and uses advised against
    Identified uses        : Laboratory chemicals, Manufacture of substances    
  
  

---

Section 2. HAZARDS IDENTIFICATION
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
    Acute toxicity, Inhalation (Category 2)
    Acute toxicity, Dermal (Category 4)
    Acute toxicity, Oral (Category 4)
    Skin irritation (Category 2)
    Acute aquatic toxicity (Category 1)
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Harmful in contact with skin and if swallowed. Irritating to skin. Very toxic to aquatic organisms, may cause
    long-term adverse effects in the aquatic environment.
  Label elements
  Labelling according Regulation (EC) No 1272/2008 [CLP]
    Pictogram
    Signal word        Danger    
    Hazard statement(s)
    H302        Harmful if swallowed.    
    H312        Harmful in contact with skin.    
    H315        Causes skin irritation.    
    H330        Fatal if inhaled.    
    H400        Very toxic to aquatic life.    
    Precautionary statement(s)
    P260        Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.    
    P273        Avoid release to the environment.    
    P280        Wear protective gloves/ protective clothing.    
    P284        Wear respiratory protection.    
    P310        Immediately call a POISON CENTER or doctor/ physician.    
    Supplemental Hazard        none    
    Statements
  According to European Directive 67/548/EEC as amended.
    Hazard symbol(s)
    R-phrase(s)
    R21/22        Harmful in contact with skin and if swallowed.    
    R38        Irritating to skin.    
    R50/53        Very toxic to aquatic organisms, may cause long-term adverse effects in    
    the aquatic environment.
    S-phrase(s)
    S36/37/39        Wear suitable protective clothing, gloves and eye/face protection.    
    S60        This material and its container must be disposed of as hazardous waste.    
    S61        Avoid release to the environment. Refer to special instructions/ Safety    
    data sheets.
    Caution - substance not yet tested completely.
  Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substances
    Formula        : C12H11ClF3NO3    
    Molecular Weight        : 309,67 g/mol    
    Component        Concentration    
  Fluxofenim
    CAS-No.        88485-37-4        -    

---

Section 4. FIRST AID MEASURES
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
  In case of eye contact
    Flush eyes with water as a precaution.
  If swallowed
    Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
  Indication of any immediate medical attention and special treatment needed
    no data available

---

Section 5. FIREFIGHTING MEASURES
  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    Carbon oxides, nitrogen oxides (NOx), Hydrogen chloride gas, Hydrogen fluoride
    Carbon oxides, nitrogen oxides (NOx), Hydrogen fluoride
  Advice for firefighters
    Wear self contained breathing apparatus for fire fighting if necessary.
  Further information
    no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions, protective equipment and emergency procedures
    Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate
    personnel to safe areas.
  Environmental precautions
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
    environment must be avoided.
  Methods and materials for containment and cleaning up
    Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
    containers for disposal.
  Reference to other sections
    For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
    Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
    Normal measures for preventive fire protection.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
    opened must be carefully resealed and kept upright to prevent leakage.
  Specific end uses
    no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
    the product.
  Personal protective equipment
  Eye/face protection
    Face shield and safety glasses Use equipment for eye protection tested and approved under
    appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
  Body Protection
    Complete suit protecting against chemicals, The type of protective equipment must be selected
    according to the concentration and amount of the dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
    with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
    to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
    respirator. Use respirators and components tested and approved under appropriate government
    standards such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Information on basic physical and chemical properties
    a) Appearance        Form: liquid    
    b) Odour        no data available    
    c) Odour Threshold        no data available    
    d) pH        no data available    
    e) Melting point/freezing        no data available    
    point
    f) Initial boiling point and no data available
    boiling range
    g) Flash point        no data available    
    h) Evaporation rate        no data available    
    i) Flammability (solid, gas) no data available
    j) Upper/lower        no data available    
    flammability or
    explosive limits
    k) Vapour pressure        no data available    
    l) Vapour density        no data available    
    m) Relative density        no data available    
    n) Water solubility        no data available    
    o) Partition coefficient: n- no data available
    octanol/water
    p) Autoignition        no data available    
    temperature
    q) Decomposition        no data available    
    temperature
    r) Viscosity        no data available    
    s) Explosive properties        no data available    
    t) Oxidizing properties        no data available    
  Other safety information
    no data available

---

Section 10. STABILITY AND REACTIVITY
  Reactivity
    no data available
  Chemical stability
    no data available
  Possibility of hazardous reactions
    no data available
  Conditions to avoid
    no data available
  Incompatible materials
    Strong oxidizing agents
  Hazardous decomposition products
    Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
  Information on toxicological effects
  Acute toxicity
    LD50 Oral - rat - 669 mg/kg
    LC50 Inhalation - rat - 4 h - > 1.210 mg/m3
    LD50 Dermal - rabbit - 1.480 mg/kg
    Remarks: Diarrhoea Gastrointestinal:Other changes. Other changes
  Skin corrosion/irritation
    no data available
  Serious eye damage/eye irritation
    no data available
  Respiratory or skin sensitization
    no data available
  Germ cell mutagenicity
    no data available
  Carcinogenicity
    IARC:        No component of this product present at levels greater than or equal to 0.1% is identified as    
    probable, possible or confirmed human carcinogen by IARC.
  Reproductive toxicity
    no data available
  Specific target organ toxicity - single exposure
    no data available
  Specific target organ toxicity - repeated exposure
    no data available
  Aspiration hazard
    no data available
  Potential health effects
  Inhalation        May be fatal if inhaled. Causes respiratory tract irritation.    
  Ingestion
    Harmful if swallowed.
  Skin        Harmful if absorbed through skin. Causes skin irritation.    
  Additional Information
    RTECS: KM5638200

---

Section 12. ECOLOGICAL INFORMATION
  Toxicity
    Toxicity to fish        LC50 - Oncorhynchus mykiss (rainbow trout) - 0,86 mg/l - 96,0 h    
  Persistence and degradability
    no data available
  Bioaccumulative potential
    no data available
  Mobility in soil
    no data available
  Results of PBT and vPvB assessment
    no data available
  Other adverse effects
    Very toxic to aquatic life.

---

Section 13. DISPOSAL CONSIDERATIONS
  Waste treatment methods
  Product
    Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
    professional waste disposal service to dispose of this material.
  Contaminated packaging
    Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
  UN number
    ADR/RID: 3082        IMDG: 3082        IATA: 3082    
  UN proper shipping name
    ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Fluxofenim)
    IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Fluxofenim)
    IATA:        Environmentally hazardous substance, liquid, n.o.s. (Fluxofenim)    
  Transport hazard class(es)
    ADR/RID: 9        IMDG: 9        IATA: 9    
  Packaging group
    ADR/RID: III        IMDG: III        IATA: III    
  Environmental hazards
    ADR/RID: yes        IMDG Marine pollutant: yes        IATA: yes    
  Special precautions for user
  Further information
    EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and combination
    packagings containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids.

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A