碘化汞,红色

碘化汞,红色 基本信息
CAS号 7774-29-0 分子式 HgI2
分子量 454.39900 精确质量  455.78000
PSA  0.00000 LogP  -5.99450

基本信息 展开↓

CAS号:
7774-29-0
3D弹球模型:
立即前往扯扯看
分子式:
HgI2
分子量:
454.39900
中文名称:
碘化汞,红色
英文名称:
mercury diiodide
中文别名:
碘化汞,红色;
碘化高汞;
二碘化汞;
红色碘化汞;
超干碘化汞;
超干碘化汞(II);
碘化汞;
potassium sulfite;
Potassium hydrogen sulphite;
Tin(II) chloride;
betz 0235;
sulfurothioic O,O-acid;
hydrogen sulfurothioate;
Sodium thiosulfate;
Sulfuric acid, copper(2+) salt (1:1) pentahydrate;
sulfuric acid, copper (2+) salt, pentahydrate;
triangle;
Cupric sulphate pentahydrate;
Copper (II) sulfate;
Copper sulfate,feeded;
Copper sulfate,medicinal;
Copper Sulphate Pentahydrate;
Copper(II) sulfate pentahydrate;
Plumbous chromate;
Primrose Chrome;
Pure Lemon Chrome L3GS;
Leadchromateyellowpowder;
Lead chromate;
Lead(II) chromate;
2-(2-oxopyrrolidin-1-yl)acetamide;
Piracetam;
Bronze, powder;
Copper wire (99.999%) 0.76mm dia.;
Copper wire cloth;
Copper foil (99.9985%);
Copper foil(99%);
Copper shot(99.9) 1-10mm;
Copper shot(99.999%) 2-8mm;
Copper metal foil;
Copper turnings;
Copper metal wire;
Copper solution 1000 ppm;
Copper solution 10 000
英文别名:
mercury diiodide;
Precipite blanc;
mercuric chloride;
Mercury(II) iodide;
Mercury protochloride;
Mild mercury chloride;
Mercury chloride;
mercuric iodide;
Mercury monochloride
精确分子量/精确质量:
455.78000
极性分子表面积/PSA:
0.00000
油水分配系数/LogP:

LogP值指的是某物质在正辛醇/水两相体系中的分配系数的对数值,反映了物质在油水两相中的分配情况。其中、LogP值越大,说明该物质越亲油;反之,LogP值越小,则说明该物质越亲水。
贝尔斯坦号/MDL:
MFCD00011044
EINECS:
231-873-8
PubChem:
24887941
InChI:
InChI=1/C9H12N2O.Hg.2HI/c1-11(2)9(12)10-8-6-4-3-5-7-8;;;/h3-7H,1-2H3,(H,10,12);;2*1H/q;+2;;/p-2

生产制备方法及用途展开↓

制备方法


用于医药与奈氏试剂的配制和钯及氨的微量分析

合成制备方法


1.复分解法:将碘化钾溶液加入反应器中,边搅拌缓慢加入氯化汞溶液进行复分解反应,生成碘化汞和氯化钾,静置,过滤,用蒸馏水洗涤,再经离心分离,干燥,制得碘化汞成品。其

2.将6g氯化汞放入100mL水中加热溶解,另取5g碘化钾溶于100mL水中。在激烈搅拌下,取大致相同量的氯化汞溶液和碘化钾溶液,滴加至盛有300mL水的烧杯中。当生成的红色微小晶体完全沉降后,倾去上部清液,然后滤出沉淀,并用冷水洗涤,直至洗涤液检测不出氯离子为止。将沉淀铺放在滤纸上,置低温暗处风干;然后在40℃下进行干燥。取5g干燥的产品,置于100mL乙醇中加热溶解,用冰冷却即得纯结晶。

用途简介


用途


1.用于奈氏试剂的配制和钯及氨的微量分析。医药用作防腐剂,对生病皮肤消毒。

2.用于医药和用作化学试剂。[16]

物化性质展开↓

熔点:
259 °C(lit.)
水溶解性:
potassium iodide solution: passes test
存储条件/存储方法:

储存注意事项[15] 储存于阴凉、通风良好的专用库房内,实行“双人收发、双人保管”制度。远离火种、热源。避免光照。包装密封。应与氧化剂、食用化学品分开存放,切忌混储。储区应备有合适的材料收容泄漏物。

稳定性相关:

1.在127℃转变为黄色,冷却时又变回红色。微溶于冷水,稍溶于丙酮、乙醇,溶于氯仿;在氨水中分解。黄色碘化汞为正交晶体或粉末。相对密度6094(127℃),熔点259℃,沸点354℃。在温度低于127℃时,会很快转变为红色碘化汞。难溶于冷水、乙醇,微溶于热水,溶于乙醚、碘化钾溶液和硫代硫酸钠溶液。

2.稳定性[11]  稳定

3.禁配物[12]  强氧化剂、三氟化氯、金属钾、金属钠

4.避免接触的条件[13]  受热、光照

5.聚合危害[14]  不聚合

其它信息:

1.性状:黄色结晶或粉末[1]

2.熔点(℃):257~259[2]

3.沸点(℃):349~354[3]

4.相对密度(水=1):6.28[4]

5.饱和蒸气压(kPa):0.13(157℃)[5]

6.溶解性:不溶于水,溶于甲醇、乙醇、乙醚、氯仿、甘油、丙酮、二硫化碳。[6]

安全信息展开↓

海关代码:
2827600000
安全标志:
S13:远离食品、饮料和动物饲料。
S28:接触皮肤之后,立即使用大量皂液洗涤。
S45:出现意外或者感到不适,立刻到医生那里寻求帮助(最好带去产品容器标签)。
S60:本物质残余物和容器必须作为危险废物处理。
S61:避免排放到环境中。参考专门的说明/安全数据表。

毒理性展开↓

毒理学数据:

1.急性毒性[7]  LD50:18mg/kg(大鼠经口);75mg/kg(大鼠经皮)

2.刺激性  暂无资料

3.致畸性[8]  雌性大鼠吸入最低中毒剂量450ng/m3(24h)导致胎儿毒性:死胎、发育障碍等。

生态数据:

1.生态毒性[9]  LC50:0.156mg/L(18h)(红藻)

2.生物降解性  暂无资料

3.非生物降解性  暂无资料

4.其他有害作用[10]  该物质对环境有危害,对植物和水生生物应给予特别注意。在对人类重要食物链中,特别是在鱼类体内、植物、贝类体内发生生物蓄积。

 

MSDS 展开↓

Name: Mercury (II) Iodide Material Safety Data Sheet
Synonym: Mercuric Iodide; Mercury Diiodide; Red Mercuric Iodide.
CAS: 7774-29-0
Section 1 - Chemical Product MSDS Name: Mercury (II) Iodide Material Safety Data Sheet
Synonym: Mercuric Iodide; Mercury Diiodide; Red Mercuric Iodide.
SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
7774-29-0 MERCURIC IODIDE >99 231-873-8
Hazard Symbols: T+ N
Risk Phrases: 26/27/28 33 50/53
SECTION 3 - HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Very toxic by inhalation, in contact with skin and if swallowed. Danger of cumulative effects. Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.Highly toxic.Light sensitive. Potential Health Effects
Eye:
Contact may cause severe eye irritation and possible eye damage.
Skin:
May cause severe skin irritation. May be absorbed through the skin.
Ingestion:
May be fatal if swallowed. Poison by ingestion. May cause kidney damage. May cause severe digestive tract irritation with abdominal pain, nausea, vomiting and diarrhea. May cause corrosion and permanent tissue destruction of the esophagus and digestive tract. Can cause nervous system damage.
Inhalation:
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. May cause effects similar to those described for ingestion.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those of acute inhalation and ingestion. Prolonged or repeated exposure may cause adverse reproductive effects. May cause fetal effects.
SECTION 4 - FIRST AID MEASURES
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Antidote: The use of Dimercaprol or BAL (British Anti-Lewisite) as a chelating agent should be determined by qualified medical personnel.
SECTION 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Combustion generates toxic fumes.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.
SECTION 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Store protected from light.
Storage:
Do not store in direct sunlight. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Poison room locked.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels. Exposure Limits CAS# 7774-29-0:
United States OSHA: 0.1 mg/m3 Ceiling (listed under Mercury, ary and inorganic compounds). Belgium - TWA: (listed as mercury, aryl and inorganic compounds): mg/m3 VLE (as Hg) France - VME: (listed as mercury, aryl and inorganic compounds): mg/m3 VME (as Hg)
Germany: (listed as mercury, aryl and inorganic compounds): 0.1 m VME (as Hg)
Germany: (listed as mercury inorganic compounds): Skin absorber
Malaysia: (listed as mercury, aryl and inorganic compounds): 0.1 mg/m3 TWA (as Hg)
Netherlands: (listed as mercury inorganic compounds): 0.15 mg/m3
Netherlands: (listed as mercury inorganic compounds): 0.05 mg/m3
Russia: (listed as mercury inorganic compounds): 0.2 mg/m3 TWA (a Hg)
Russia: (listed as mercury inorganic compounds): 0.05 mg/m3 STEL Hg)
Spain: (listed as mercury, aryl and inorganic compounds): 0.1 mg/ VLA-ED (as Hg) Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: red
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 662 deg F
Freezing/Melting Point: 498.2 deg F
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 6.3600
Molecular Formula: HgI2
Molecular Weight: 454.399
SECTION 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials, light, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, chlorine trifluoride, potassium, sodium, light.
Hazardous Decomposition Products:
Hydrogen iodide, mercury/mercury oxides.
Hazardous Polymerization: Has not been reported.
SECTION 11 - TOXICOLOGICAL INFORMATION RTECS#: CAS# 7774-29-0: OW5250000
LD50/LC50:
CAS# 7774-29-0: Oral, mouse: LD50 = 17 mg/kg; Oral, rat: LD50 = 18 mg/kg; Skin, rat: LD50 = 75 mg/kg.
Carcinogenicity:
MERCURIC IODIDE - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
SECTION 12 - ECOLOGICAL INFORMATION Other No information available.
SECTION 13 - DISPOSAL CONSIDERATIONS Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
SECTION 14 - TRANSPORT INFORMATION IATA
Shipping Name: MERCURY IODIDE
Hazard Class: 6.1
UN Number: 1638
Packing Group: II IMO
Shipping Name: MERCURY IODIDE
Hazard Class: 6.1
UN Number: 1638
Packing Group: II RID/ADR
Shipping Name: MERCURY IODIDE
Hazard Class: 6.1
UN Number: 1638
Packing group: II
SECTION 15 - REGULATORY INFORMATION European/International Regulations European Labeling in Accordance with EC Directives
Hazard Symbols: T+ N
Risk Phrases:
R 26/27/28 Very toxic by inhalation, in contact with skin and if swallowed. R 33 Danger of cumulative effects. R 50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Safety Phrases:
S 13 Keep away from food, drink and animal feeding stuffs. S 28 After contact with skin, wash immediately with... S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S 60 This material and its container must be disposed of as hazardous waste. S 61 Avoid release to the environment. Refer to special instructions/safety data sheets. WGK (Water Danger/Protection) CAS# 7774-29-0: 3 Canada CAS# 7774-29-0 is listed on Canada's DSL List. CAS# 7774-29-0 is listed on Canada's Ingredient Disclosure List. US FEDERAL TSCA CAS# 7774-29-0 is listed on the TSCA inventory.
SECTION 16 - ADDITIONAL INFORMATION
MSDS Creation Date: 12/12/1997 Revision #4 Date: 3/18/2003 The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.

SECTION 16 - ADDITIONAL INFORMATION
N/A

分子结构与计算化学数据展开↓

计算化学数据


1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:0

3.氢键受体数量:0

4.可旋转化学键数量:0

5.互变异构体数量:无

6.拓扑分子极性表面积0

7.重原子数量:3

8.表面电荷:0

9.复杂度:2.8

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

上下游相关产品

下游产品

更多
  • 143-36-2

    甲基碘化汞(II)

  • 7783-30-4

    iodomercury

立即下载安装“化学加”APP
专业、功能强大,随时调用更加方便