---

Section 1: Product Identification
   Chemical Name:       Potassium tetrabromopalladate(II), 98%    
   CAS Registry Number:       13826-93-2    
   Formula:       K2PdBr4    
   EINECS Number:       237-535-6    
   Chemical Family:       halometallate salt    
   Synonym:       Dipotassium palladium tetrabromide    

---

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title Compound       13826-93-2       100%       no data       no data    

---

Section 3: Hazards Identification
   Irritating to skin, eyes and the respiratory tract. Bromide exposure may cause central nervous system effects
   Emergency Overview:
   and skin rashes.
   Primary Routes of Exposure:       Contact with skin and eyes. Inhalation of dust.    
   Eye Contact:       Causes mild irritation to the eyes.    
   Skin Contact:       Causes slight irritation of the skin.    
   Inhalation:       Dust causes irritation to the respiratory tract; symptoms may include coughing and shortness of breath.    
   Ingestion:       May cause nausea, vomiting and abdominal pain and produce central nervous system effects.    
   Irritating to skin, eyes and respiratory tract. Symptoms of bromide ingestion may include skin rash, blurred
   Acute Health Affects:
   vision, drowsiness, irritability, dizziness, mania, hallucinations, and coma.
   Repeated or prolonged exposure to bromides by any route may cause skin rashes (bromaderma) and central
   Chronic Health Affects:
   nervous system depression, including ataxia, psychoses, memory loss, irritability, and headache.
   NTP:       No    
   IARC:       No    
   OSHA:       No    

---

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
   Skin Exposure:
   irritation persists.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
   Inhalation:
   in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   Ingestion:
   vomiting only if directed by medical personnel.

---

SECTION 5: Fire Fighting Measures
   Flash Point:       not applicable    
   Autoignition Temperature:       none    
   Explosion Limits:       none    
   Extinguishing Medium:       None. Material is non-flammable.    
   Special Fire Fighting Procedures:       No special fire fighting procedures required.    
   Hazardous Combustion and       none    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards.

---

SECTION 6: Accidental Release Measures
   To avoid raising dust, small spills may be mixed with diatomaceous earth, sand, vermiculite or other suitable
   Spill and Leak Procedures:
   inert material and swept up.

---

SECTION 7: Handling and Storage
   Store solid in a tightly sealed container away from moisture. Handle under a dry atmosphere of air or nitrogen.
   Handling and Storage:
   Prolonged exposure to the atmosphere may degrade the product.

---

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove.    
   Ventilation:       Material may form a fine dust. If possible, handle the material in an efficient fume hood.    
   If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators
   Respirator:
   requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       Material may form a fine dust. If possible, handle the material in an efficient fume hood.    
   Additional Protection:       No additional protection required.    

---

SECTION 9: Physical and Chemical Properties
   Color and Form:       reddish-brown pwdr.    
   Molecular Weight:       504.21    
   Melting Point:       no data    
   Boiling Point:       no data    
   Vapor Pressure:       not applicable    
   Specific Gravity:       no data    
   Odor:       none    
   Solubility in Water:       very soluble    

---

SECTION 10: Stability and Reactivity
   Stability:       hygroscopic    
   Hazardous Polymerization:       no hazardous polymerization    
   Conditions to Avoid:       contact with moisture    
   Incompatibility:       Active metals    
   Decomposition Products:       potassium bromide, palladium bromide, palladium, and bromine.    

---

SECTION 11: Toxicological Information
   RTECS Data:       No information available in the RTECS files.    
   Carcinogenic Effects:       no data    
   Mutagenic Effects:       no data    
   Tetratogenic Effects:       no data    

---

SECTION 12: Ecological Information
   Ecological Information:       No information available    

---

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to local, state and federal regulations.    

---

SECTION 14: Transportation
   Shipping Name (CFR):       Non-hazardous    
   Hazard Class (CFR):       NA    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       NA    
   UN ID Number (CFR):       NA    
   Shipping Name (IATA):       Non-hazardous    
   Hazard Class (IATA):       NA    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       NA    
   UN ID Number (IATA):       NA    

---

SECTION 15: Regulatory Information
   TSCA:       Listed in the TSCA inventory.    
   SARA (Title 313):       Title compound not listed.    
   Second Ingredient:       none    

---

SECTION 16 - ADDITIONAL INFORMATION
N/A