N,N-1,2-亚苯基双 [1,3-二氢-alfa,alfa-二甲基 1,3-二氧代-2H-异吲哚-2-乙酰胺

N,N-1,2-亚苯基双 [1,3-二氢-alfa,alfa-二甲基 1,3-二氧代-2H-异吲哚-2-乙酰胺 基本信息
CAS号 401846-08-0 分子式 C30H26N4O6
分子量 538.55100 精确质量  538.18500
PSA  139.94000 LogP  4.88800

基本信息 展开↓

CAS号:
401846-08-0
分子式:
C30H26N4O6
分子量:
538.55100
中文名称:
N,N-1,2-亚苯基双 [1,3-二氢-alfa,alfa-二甲基 1,3-二氧代-2H-异吲哚-2-乙酰胺
英文名称:
2-(1,3-dioxoisoindol-2-yl)-N-[2-[[2-(1,3-dioxoisoindol-2-yl)-2-methylpropanoyl]amino]phenyl]-2-methylpropanamide
中文别名:
N,N-1,2-亚苯基双 [1,3-二氢-alfa,alfa-二甲基 1,3-二氧代-2H-异吲哚-2-乙酰胺
英文别名:
2-(1,3-dioxoisoindol-2-yl)-N-[2-[[2-(1,3-dioxoisoindol-2-yl)-2-methylpropanoyl]amino]phenyl]-2-methylpropanamide;
N,N'-1,2-Phenylene bis [1,3-dihydro-alfa,alfa-dimethyl 1,3-dioxo-2H-isoindole-2-acetamide
精确分子量/精确质量:
538.18500
极性分子表面积/PSA:
139.94000
油水分配系数/LogP:

LogP值指的是某物质在正辛醇/水两相体系中的分配系数的对数值,反映了物质在油水两相中的分配情况。其中、LogP值越大,说明该物质越亲油;反之,LogP值越小,则说明该物质越亲水。

物化性质展开↓

密度:
1.455g/cm3
沸点:
781.552ºC at 760 mmHg
闪点:
426.467ºC
折射率:
1.705

MSDS 展开↓

Name: 1 2-Bis(phthalimido-isobutyryl-amido)benzene Material Safety Data Sheet
Synonym: None Known
CAS: 401846-08-0
Section 1 - Chemical Product   MSDS Name:1 2-Bis(phthalimido-isobutyryl-amido)benzene Material Safety Data Sheet
Synonym:None Known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
401846-08-0 1,2-Bis(phthalimido-isobutyryl-amido)b 100 unlisted
Hazard Symbols: XN
Risk Phrases: 20/21/22

Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause irritation of the digestive tract.
The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Harmful if inhaled.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
  Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 401846-08-0: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Solid
Color: off-white to brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: C30H26N4O6
Molecular Weight: 538.21

Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Will decompose in strong acidic or strong basic environments. Strong oxidizers will break it up as well..
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 401846-08-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,2-Bis(phthalimido-isobutyryl-amido)benzene - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
 

Section 13 - DISPOSAL CONSIDERATIONS
  Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: III

Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 401846-08-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 401846-08-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 401846-08-0 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A
立即下载安装“化学加”APP
专业、功能强大,随时调用更加方便