N-(1-萘磺酰氯)-L-苯丙氨酸氯

N-(1-萘磺酰氯)-L-苯丙氨酸氯 基本信息
CAS号 146864-62-2 分子式 C19H16ClNO3S
分子量 373.85300 精确质量  373.05400
PSA  71.62000 LogP  4.96650

基本信息 展开↓

CAS号:
146864-62-2
分子式:
C19H16ClNO3S
分子量:
373.85300
中文名称:
N-(1-萘磺酰氯)-L-苯丙氨酸氯
英文名称:
(2S)-2-(naphthalen-1-ylsulfonylamino)-3-phenylpropanoyl chloride
中文别名:
N-(1-萘磺酰氯)-L-苯丙氨酸氯;
N-(1-萘磺酰)-L-苯丙氨酰氯
英文别名:
(2S)-2-(naphthalen-1-ylsulfonylamino)-3-phenylpropanoyl chloride;
N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride
精确分子量/精确质量:
373.05400
极性分子表面积/PSA:
71.62000
油水分配系数/LogP:

LogP值指的是某物质在正辛醇/水两相体系中的分配系数的对数值,反映了物质在油水两相中的分配情况。其中、LogP值越大,说明该物质越亲油;反之,LogP值越小,则说明该物质越亲水。

物化性质展开↓

熔点:
104ºC
其它信息:

1.      性状:未确定

2.      密度(g/mL,25):未确定

3.      相对蒸汽密度(g/mL,空气=1):未确定

4.      熔点(ºC):104

5.      沸点(ºC,常压):未确定

6.      沸点(ºC  3mmHg):未确定

7.      折射率:19º

8.      闪点(ºF):未确定

9.      比旋光度(º):未确定

10.   自燃点或引燃温度(ºC):不适用

11.   蒸气压(kPa,25ºC):未确定

12.   饱和蒸气压(kPa,60ºC):未确定

13.   燃烧热(KJ/mol):未确定

14.   临界温度(ºC):未确定

15.   临界压力(KPa):未确定

16.   油水(辛醇/水)分配系数的对数值:未确定

17.   爆炸上限(%,V/V):未确定

18.   爆炸下限(%,V/V):未确定

19.   溶解性:未确定

安全信息展开↓

海关代码:
2935009090

MSDS 展开↓

  N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride      Revision number: 5    
  SAFETY DATA SHEET

Section 1. IDENTIFICATION
  Product name:        N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride    
    
  Revision number:        5    

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS
  Skin corrosion/irritation        Category 2    
    Category 2A
  Serious eye damage/eye irritation
  ENVIRONMENTAL HAZARDS        Not classified    
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Warning    
  Hazard statements        Causes skin irritation    
    Causes serious eye irritation
  Precautionary statements:
    Wash hands thoroughly after handling.
  [Prevention]
    Wear protective gloves/eye protection/face protection.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
  [Response]
    if present and easy to do. Continue rinsing.
    If eye irritation persists: Get medical advice/attention.
    IF ON SKIN: Gently wash with plenty of soap and water.
    If skin irritation occurs: Get medical advice/attention.
    Take off contaminated clothing and wash before reuse.

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Components:        N-(1-Naphthalenesulfonyl)-L-phenylalanyl Chloride    
  Percent:        >98.0%(T)    
  CAS Number:        146864-62-2    
  Chemical Formula:        C19H16ClNO3S    

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention if you feel unwell.
  N-(1-Naphthalenesulfonyl)-L-phenylalanyl
  Chloride

Section 4. FIRST AID MEASURES
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Get medical advice/attention if you feel unwell. Rinse mouth.    
    A rescuer should wear personal protective equipment, such as rubber gloves and air-
  Protection of first-aiders:
    tight goggles.

Section 5. FIRE-FIGHTING MEASURES
  Suitable extinguishing        Dry chemical, carbon dioxide.    
  media:
  Unsuitable extinguishing Water
  media:
  Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
  from the chemical:        generate poisonous fume.    
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Remove movable
    containers if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use personal protective equipment. Keep people away from and upwind of spill/leak.    
  protective equipment and Entry to non-involved personnel should be controlled around the leakage area by
  emergency procedures: roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
  containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
  up: appropriate laws and regulations.
  Prevention of secondary Do not allow contact with water. Remove all sources of ignition. Fire-extinguishing
  hazards:        devices should be prepared in case of a fire. Use spark-proof tools and explosion-    
    proof equipment.

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent dispersion of dust. Wash hands and face thoroughly after handling.
    Use a local exhaust if dust or aerosol will be generated.
  Advice on safe handling: Avoid contact with skin, eyes and clothing.
    May develop pressure. Open carefully.
  Conditions for safe storage, including any
  incompatibilities
    Keep container tightly closed. Store in a cool and dark place.
  Storage conditions:
    Store under inert gas.
    Protect from moisture.
    Store away from incompatible materials such as oxidizing agents.
    Moisture-sensitive
  Packaging material:        Comply with laws.    

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust as possible so that workers should not be    
    exposed directly. Also install safety shower and eye bath.
  Personal protective equipment
  N-(1-Naphthalenesulfonyl)-L-phenylalanyl
  Chloride

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Respiratory protection: Dust respirator. Follow local and national regulations.
  Hand protection:        Protective gloves.    
  Eye protection:        Safety glasses. A face-shield, if the situation requires.    
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
    Solid
  Physical state (20°C):
  Form:        Crystal- Powder    
  Colour:        White - Pale yellow    
  Odour:        No data available    
  pH: No data available
  Melting point/freezing point:104°C
  Boiling point/range:        No data available    
  Flash point:        No data available    
  Flammability or explosive
  limits:
  Lower:        No data available    
  Upper:        No data available    
  Relative density:        No data available    
  Solubility(ies):
  [Water]        No data available    
  [Other solvents]        No data available    

Section 10. STABILITY AND REACTIVITY
  Chemical stability:        Stable under proper conditions.    
  Possibility of hazardous Decomposes in contact with water and liberates toxic gases.
  reactions:
    Moisture
  Conditions to avoid:
  Incompatible materials: Oxidizing agents
  Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx), Sulfur oxides, Hydrogen
  products:        chloride    

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
  Fish:        No data available    
    No data available
  Crustacea:
  Algae:        No data available    
  Persistence / degradability: No data available
  Bioaccumulative        No data available    
  potential(BCF):
  Mobility in soil
    No data available
  Log Pow:
  Soil adsorption (Koc):        No data available    
    No data available
  Henry's Law
  constant(PaM3/mol):
  N-(1-Naphthalenesulfonyl)-L-phenylalanyl
  Chloride

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
    with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
    Observe all federal, state and local regulations when disposing of the substance.

Section 14. TRANSPORT INFORMATION
    Does not correspond to the classification standard of the United Nations
  Hazards Class:
  UN-No:        Not listed    

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

海关数据查看详细

中国海关编码:2935009090

概述:
2935009090 其他磺(酰)胺. 增值税率:17.0% 退税率:9.0% 监管条件:无 最惠国关税:6.5% 普通关税:35.0%
申报要素:
品名, 成分含量, 用途
摘要/Summary:
2935009090 other sulphonamides VAT:17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:35.0%

分子结构与计算化学数据展开↓

分子结构数据


1、摩尔折射率:100.3

2、摩尔体积(cm3/mol):276.7

3、等张比容(90.2K):752.5

4、表面张力(dyne/cm):54.6

5、介电常数:无可用的

6、极化率(10-24cm3):39.76

7、单一同位素质量:373.053941 Da

8、标称质量:373 Da

9、平均质量:373.8532 Da

计算化学数据


1.疏水参数计算参考值(XlogP):4.7

2.氢键供体数量:1

3.氢键受体数量:4

4.可旋转化学键数量:6

5.互变异构体数量:无

6.拓扑分子极性表面积71.6

7.重原子数量:25

8.表面电荷:0

9.复杂度:554

10.同位素原子数量:0

11.确定原子立构中心数量:1

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

立即下载安装“化学加”APP
专业、功能强大,随时调用更加方便