Version 1.2
    Regulation (EC) No 1907/2006

---

    1 - Product and Company Information

---

    Product Name        CARBOXYETHYL-GAMMA-AMINOBUTYRIC ACID    
    HYBRI-MAX

---

    2 - Hazards Identification

---

    3 - Composition/Information on Ingredients

---

    Product Name        CAS #        EC no        Annex I    
    Index Number
    CARBOXYETHYL-GAMMA-AMINOBUTYRIC 4386-03-2 224-497-0 None
    ACIDAPPROX. 97%
    Formula        C7H13NO4    
    Molecular Weight 175,2000 AMU
    Synonyms        Butyric acid, 4-((2-carboxyethyl)amino)-    
    (6CI,7CI,8CI) *
    4-((2-Carboxyethyl)amino)butanoic acid *
    Carboxyethyl-gamma-aminobutyric acid * Spermidic
    acid

---

    4 - First Aid Measures

---

    AFTER INHALATION
    If inhaled, remove to fresh air. If breathing becomes difficult,
    call a physician.
    AFTER SKIN CONTACT
    In case of skin contact, flush with copious amounts of water for
    at least 15 minutes. Remove contaminated clothing and shoes.
    Call a physician.
    AFTER EYE CONTACT
    In case of contact with eyes, flush with copious amounts of
    water for at least 15 minutes. Assure adequate flushing by
    separating the eyelids with fingers. Call a physician.
    AFTER INGESTION
    SIGMA        www.molbase.com    
    If swallowed, wash out mouth with water provided person is
    conscious. Call a physician.

---

    5 - Fire Fighting Measures

---

    EXTINGUISHING MEDIA
    Suitable: Water spray. Carbon dioxide, dry chemical powder, or
    appropriate foam.
    SPECIAL RISKS
    Specific Hazard(s): Emits toxic fumes under fire conditions.
    SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
    Wear self-contained breathing apparatus and protective clothing
    to prevent contact with skin and eyes.

---

    6 - Accidental Release Measures

---

    PROCEDURE(S) OF PERSONAL PRECAUTION(S)
    Wear protective equipment.
    METHODS FOR CLEANING UP
    Sweep up, place in a bag and hold for waste disposal. Avoid
    raising dust. Ventilate area and wash spill site after material
    pickup is complete.

---

    7 - Handling and Storage

---

    8 - Exposure Controls / Personal Protection

---

    ENGINEERING CONTROLS
    Mechanical exhaust required.
    PERSONAL PROTECTIVE EQUIPMENT
    Respiratory Protection: Use respirators and components tested and
    approved under appropriate government standards such as NIOSH (US)
    or CEN (EU). Respiratory protection is not required. Where
    protection from nuisance levels of dusts are desired, use type N95
    (US) or type P1 (EN 143) dust masks.
    Hand Protection: Compatible chemical-resistant gloves.
    Eye Protection: Chemical safety goggles.

---

    9 - Physical and Chemical Properties

---

    Appearance        Physical State: Solid    
    Property        Value        At Temperature or Pressure    
    pH        N/A    
    BP/BP Range        N/A    
    MP/MP Range        N/A    
    Flash Point        N/A    
    Flammability        N/A    
    Autoignition Temp        N/A    
    Oxidizing Properties        N/A    
    Explosive Properties        N/A    
    Explosion Limits        N/A    
    Vapor Pressure        N/A    
    Partition Coefficient        N/A    
    SIGMA        www.molbase.com    
    Viscosity        N/A    
    Vapor Density        N/A    
    Saturated Vapor Conc. N/A
    Evaporation Rate        N/A    
    Bulk Density        N/A    
    Decomposition Temp.        N/A    
    Solvent Content        N/A    
    Water Content        N/A    
    Surface Tension        N/A    
    Conductivity        N/A    
    Miscellaneous Data        N/A    
    Solubility        N/A    

---

    10 - Stability and Reactivity

---

    STABILITY
    Stable: Stable.
    Materials to Avoid: Strong oxidizing agents.
    HAZARDOUS DECOMPOSITION PRODUCTS
    Hazardous Decomposition Products: Carbon monoxide, carbon dioxide,
    and nitrogen oxides.
    HAZARDOUS POLYMERIZATION
    Hazardous Polymerization: Will not occur

---

    11 - Toxicological Information

---

    RTECS NUMBER: EK7730000
    ACUTE TOXICITY
    LD50
    Intraperitoneal
    Rat
    877 MG/KG
    LD50
    Intraperitoneal
    Mouse
    783 MG/KG
    ROUTE OF EXPOSURE
    Skin Contact: May cause skin irritation.
    Eye Contact: May cause eye irritation.
    Multiple Routes: May be harmful by inhalation, ingestion, or
    skin absorption.
    CONDITIONS AGGRAVATED BY EXPOSURE
    The toxicological properties have not been thoroughly
    investigated.

---

    12 - Ecological Information

---

    No data available.

---

    13 - Disposal Considerations

---

    SUBSTANCE DISPOSAL
    Dissolve or mix the material with a combustible solvent and burn
    SIGMA        www.molbase.com    
    in a chemical incinerator equipped with an afterburner and
    scrubber. Observe all federal, state, and local environmental
    regulations.

---

    14 - Transport Information

---

    RID/ADR
    Non-hazardous for road transport.
    IMDG
    Non-hazardous for sea transport.
    IATA
    Non-hazardous for air transport.

---

    15 - Regulatory Information

---

    COUNTRY SPECIFIC INFORMATION
    Germany
    WGK: 3
    Self-Classification

---

    16 - Other Information

---

    WARRANTY
    The above information is believed to be correct but does not
    purport to be all inclusive and shall be used only as a guide. The
    information in this document is based on the present state of our
    knowledge and is applicable to the product with regard to
    appropriate safety precautions. It does not represent any
    guarantee of the properties of the product. Inc.,
    shall not be held liable for any damage resulting from handling or
    from contact with the above product. See reverse side of invoice
    or packing slip for additional terms and conditions of sale.
    Copyright 2010 Co. License granted to make
    unlimitedpaper copies for internal use only.
    DISCLAIMER
    For R&D use only. Not for drug, household or other uses.
    SIGMA        www.molbase.com    

---

SECTION 16 - ADDITIONAL INFORMATION
N/A