Version 1.2
    Regulation (EC) No 1907/2006

---

    1 - Product and Company Information

---

    Product Name        4-CHLORO-M-TOLYL 4-NITROPHENYL ETHER    

---

    2 - Hazards Identification

---

    3 - Composition/Information on Ingredients

---

    Product Name        CAS #        EC no        Annex I    
    Index Number
    4-CHLORO-M-TOLYL 4-NITROPHENYL        None        None        None    
    ETHER

---

    4 - First Aid Measures

---

    AFTER INHALATION
    If inhaled, remove to fresh air. If not breathing give
    artificial respiration. If breathing is difficult, give oxygen.
    AFTER SKIN CONTACT
    In case of contact, immediately wash skin with soap and copious
    amounts of water.
    AFTER EYE CONTACT
    In case of contact, immediately flush eyes with copious amounts
    of water for at least 15 minutes.
    AFTER INGESTION
    If swallowed, wash out mouth with water provided person is
    conscious. Call a physician.

---

    5 - Fire Fighting Measures

---

    EXTINGUISHING MEDIA
    Suitable: Water spray. Carbon dioxide, dry chemical powder, or
    appropriate foam.
    SPECIAL RISKS
    Specific Hazard(s): Emits toxic fumes under fire conditions.
    ALDRICH        www.molbase.com    
    SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
    Wear self-contained breathing apparatus and protective clothing
    to prevent contact with skin and eyes.

---

    6 - Accidental Release Measures

---

    PROCEDURE(S) OF PERSONAL PRECAUTION(S)
    Wear self-contained breathing apparatus, rubber boots, and heavy
    rubber gloves.
    METHODS FOR CLEANING UP
    Sweep up, place in a bag and hold for waste disposal. Avoid
    raising dust. Ventilate area and wash spill site after material
    pickup is complete.

---

    7 - Handling and Storage

---

    HANDLING
    Directions for Safe Handling: Avoid inhalation. Do not get in
    eyes, on skin, on clothing. Avoid prolonged or repeated exposure.
    STORAGE
    Conditions of Storage: Keep tightly closed. Store in a cool dry
    place.

---

    8 - Exposure Controls / Personal Protection

---

    ENGINEERING CONTROLS
    Safety shower and eye bath. Mechanical exhaust required.
    GENERAL HYGIENE MEASURES
    Wash thoroughly after handling. Wash contaminated clothing before
    reuse.
    PERSONAL PROTECTIVE EQUIPMENT
    Respiratory Protection: Use respirators and components tested and
    approved under appropriate government standards such as NIOSH (US)
    or CEN (EU). Respiratory protection is not required. Where
    protection from nuisance levels of dusts are desired, use type N95
    (US) or type P1 (EN 143) dust masks.
    Hand Protection: Rubber gloves.
    Eye Protection: Chemical safety goggles.

---

    9 - Physical and Chemical Properties

---

    Appearance        Physical State: Solid    
    Property        Value        At Temperature or Pressure    
    pH        N/A    
    BP/BP Range        N/A    
    MP/MP Range        N/A    
    Flash Point        N/A    
    Flammability        N/A    
    Autoignition Temp        N/A    
    Oxidizing Properties        N/A    
    Explosive Properties        N/A    
    Explosion Limits        N/A    
    Vapor Pressure        N/A    
    ALDRICH        www.molbase.com    
    Partition Coefficient N/A
    Viscosity        N/A    
    Vapor Density        N/A    
    Saturated Vapor Conc. N/A
    Evaporation Rate        N/A    
    Bulk Density        N/A    
    Decomposition Temp.        N/A    
    Solvent Content        N/A    
    Water Content        N/A    
    Surface Tension        N/A    
    Conductivity        N/A    
    Miscellaneous Data        N/A    
    Solubility        N/A    

---

    10 - Stability and Reactivity

---

    STABILITY
    Materials to Avoid: Strong oxidizing agents, Strong bases.
    HAZARDOUS DECOMPOSITION PRODUCTS
    Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
    Nitrogen oxides, Hydrogen chloride gas.
    HAZARDOUS POLYMERIZATION
    Hazardous Polymerization: Will not occur

---

    11 - Toxicological Information

---

    SIGNS AND SYMPTOMS OF EXPOSURE
    To the best of our knowledge, the chemical, physical, and
    toxicological properties have not been thoroughly investigated.
    ROUTE OF EXPOSURE
    Skin Contact: May cause skin irritation.
    Eye Contact: May cause eye irritation.
    Multiple Routes: May be harmful by inhalation, ingestion, or
    skin absorption.

---

    12 - Ecological Information

---

    No data available.

---

    13 - Disposal Considerations

---

    SUBSTANCE DISPOSAL
    Dissolve or mix the material with a combustible solvent and burn
    in a chemical incinerator equipped with an afterburner and
    scrubber. Observe all federal, state, and local environmental
    regulations.

---

    14 - Transport Information

---

    15 - Regulatory Information

---

    Caution: Substance not yet fully tested (EU).
    COUNTRY SPECIFIC INFORMATION
    Germany
    ALDRICH        www.molbase.com    
    WGK: 3
    Self-Classification

---

    16 - Other Information

---

    WARRANTY
    The above information is believed to be correct but does not
    purport to be all inclusive and shall be used only as a guide. The
    information in this document is based on the present state of our
    knowledge and is applicable to the product with regard to
    appropriate safety precautions. It does not represent any
    guarantee of the properties of the product. Inc.,
    shall not be held liable for any damage resulting from handling or
    from contact with the above product. See reverse side of invoice
    or packing slip for additional terms and conditions of sale.
    Copyright 2010 Co. License granted to make
    unlimitedpaper copies for internal use only.
    DISCLAIMER
    For R&D use only. Not for drug, household or other uses.
    ALDRICH        www.molbase.com    

---

SECTION 16 - ADDITIONAL INFORMATION
N/A