苯胺基乙醛二乙基缩醛

苯胺基乙醛二乙基缩醛 基本信息
CAS号 22758-34-5 分子式 C12H19NO2
分子量 209.28500 精确质量 　209.14200
PSA 　30.49000 LogP 　2.57060
我要卖该产品 我要采购该产品
充值推广 查看更多供应商
目录
基本信息 制备方法与用途 物化性质 安全信息 合成路线 毒性 MSDS 海关数据 结构与计算数据 上下游

基本信息 展开↓

CAS号：
22758-34-5
3D弹球模型：
立即前往扯扯看
分子式：
C12H19NO2
分子量：
209.28500
中文名称：
苯胺基乙醛二乙基缩醛
英文名称：
N-(2,2-diethoxyethyl)aniline
中文别名：
苯胺基乙醛二乙基缩醛;
苯胺乙醛二乙基乙缩醛;
N-苯胺基乙醛缩二乙醇
英文别名：
N-(2,2-diethoxyethyl)aniline;
2-anilinoacetaldehyde diethyl acetal;
2-Anilino-1.1-diaethoxy-aethan;
N-phenyl-2-aminoacetaldehyde diethylacetal;
Anilinoacetaldehyde diethyl acetal;
Anilino-acetaldehyd-diaethylacetal
精确分子量/精确质量：
209.14200
极性分子表面积/PSA：
30.49000
油水分配系数/LogP：

LogP值指的是某物质在正辛醇/水两相体系中的分配系数的对数值，反映了物质在油水两相中的分配情况。其中、LogP值越大，说明该物质越亲油；反之，LogP值越小，则说明该物质越亲水。
贝尔斯坦号/MDL：
MFCD00051601
BRN：
2806325
InChI：
InChI=1/C12H19NO2/c1-3-14-12(15-4-2)10-13-11-8-6-5-7-9-11/h5-9,12-13H,3-4,10H2,1-2H3

生产制备方法及用途展开↓

合成制备方法


用途


物化性质展开↓

密度：
1.023g/cm3
沸点：
320ºC at 760mmHg
闪点：
131.7ºC
折射率：
1.5105-1.5125
蒸汽压：
0.000326mmHg at 25°C
存储条件/存储方法：

保持贮藏器密封

放入紧密的贮藏器内，储存在阴凉，干燥的地方

稳定性相关：

如果遵照规格使用和储存则不会分解

避免接触氧化物

其它信息：

1. 性状：液体

2. 密度（g/mL,25/4℃）：未确定

3. 相对蒸汽密度（g/mL,空气=1）：未确定

4. 熔点（ºC）：未确定

5. 沸点（ºC,常压）：153-154 °C (12 mmHg)

6. 沸点（ºC,5.2kPa）： 未确定

7. 折射率：1.5105-1.5125

8. 闪点（ºC）： 153-154°C/12mm

9. 比旋光度（º）： 未确定

10. 自燃点或引燃温度（ºC）： 未确定

11. 蒸气压（kPa,25ºC）： 未确定

12. 饱和蒸气压（kPa,60ºC）： 未确定

13. 燃烧热（KJ/mol）：未确定

14. 临界温度（ºC）： 未确定

15. 临界压力（KPa）： 未确定

16. 油水（辛醇/水）分配系数的对数值： 未确定

17. 爆炸上限（%,V/V）：未确定

18. 爆炸下限（%,V/V）： 未确定

19. 溶解性：未确定

安全信息展开↓

海关代码：
2922199090
安全说明：
S24/25
安全标志：
S24/25:防止皮肤和眼睛接触。

合成路线查看所有的合成路线

  • 74497-02-2

    1-aminobenzene

  • +

  • 2032-35-1

    2-溴-1,1-二乙氧基乙烷

  • →

    ~76%

  • 22758-34-5

    苯胺基乙醛二乙基缩醛

  • 74497-02-2

    1-aminobenzene

  • +

  • 621-62-5

    氯乙醛缩二乙醇

  • →

  • 22758-34-5

    苯胺基乙醛二乙基缩醛

  • 2032-35-1

    2-溴-1,1-二乙氧基乙烷

  • →

  • 22758-34-5

    苯胺基乙醛二乙基缩醛

毒理性展开↓

毒理学数据：


生态数据：

对水是稍微危害的，若无政府许可，勿将材料排入周围环境。

MSDS 展开↓

Name: Anilinoacetaldehyde Diethyl Acetal Material Safety Data Sheet
Synonym: None Known
CAS: 22758-34-5
Section 1 - Chemical Product   MSDS Name:Anilinoacetaldehyde Diethyl Acetal Material Safety Data Sheet
Synonym:None Known
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
22758-34-5 Anilinoacetaldehyde Diethyl Acetal ca. 100 unlisted
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Light sensitive.Moisture sensitive.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.
Section 4 - FIRST AID MEASURES
  Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam. Do NOT get water inside containers.
Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation. Do not get water inside containers.
Section 7 - HANDLING and STORAGE
  Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Store protected from light. Do not allow contact with water. Keep from contact with moist air and steam.
Storage:
Store in a cool, dry place. Do not store in direct sunlight. Store in a tightly closed container. Store protected from moisture. Store protected from light.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 22758-34-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 151-152 deg C@10 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C12H19NO2
Molecular Weight: 209.29
Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable under normal temperatures and pressures. Moisture sensitive.
Light sensitive.
Conditions to Avoid:
Light, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents, strong bases, strong acids.
Hazardous Decomposition Products:
Hydrogen cyanide, carbon monoxide, oxides of nitrogen, carbon dioxide, nitric acid.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 22758-34-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Anilinoacetaldehyde Diethyl Acetal - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
 
Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
 
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 22758-34-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 22758-34-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 22758-34-5 is not listed on the TSCA inventory.
It is for research and development use only.

SECTION 16 - ADDITIONAL INFORMATION
N/A

海关数据查看详细

中国海关编码：2922199090

概述：
2922199090. 其他氨基醇及其醚，酯和它们的盐（但含一种以上含氧基的除外）. 增值税率:17.0%. 退税率:13.0%. 监管条件:无. 最惠国关税:6.5%. 普通关税:30.0%
申报要素：
品名, 成分含量, 用途, 乙醇胺及其盐应报明色度, 乙醇胺及其盐应报明包装
摘要/Summary：
2922199090. other amino-alcohols, other than those containing more than one kind of oxygen function, their ethers and esters; salts thereof. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

分子结构与计算化学数据展开↓

分子结构数据

五、分子性质数据：

1、   摩尔折射率：62.47

2、   摩尔体积（cm3/mol）：204.5

3、   等张比容(90.2K)：501.8

4、   表面张力(dyne/cm)：36.2

5、   极化率(10-24cm3)：24.76

 

 

 

计算化学数据

1.疏水参数计算参考值（XlogP）:2.5

2.氢键供体数量:1

3.氢键受体数量:3

4.可旋转化学键数量:7

5.互变异构体数量:无

6.拓扑分子极性表面积30.5

7.重原子数量:15

8.表面电荷:0

9.复杂度:141

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

上下游相关产品

上游产品

更多

  • 2032-35-1

    2-溴-1,1-二乙氧基乙烷

  • 645-36-3

    CAS号：645-36-3

  • 71-43-2

    苯

  • 621-62-5

    氯乙醛缩二乙醇

下游产品

更多

  • 3377-71-7

    1-苄基吲哚

  • 17452-09-4

    1-苯基咪唑啉-2-硫酮

  • 70390-93-1

    1-methylsulfonylindole

  • 88131-48-0

    N-(2,2-diethoxyethyl)-N-phenylmethanesulfonamide

  • 62615-78-5

    2,2,2-trifluoro-1-indol-1-ylethanone

立即下载安装“化学加”APP
专业、功能强大，随时调用更加方便
下载APP