1,5-Bis(acryloyloxy)pentane (stabilized with MEHQ)      Revision number: 6    
  SAFETY DATA SHEET

---

Section 1. IDENTIFICATION
  Product name:        1,5-Bis(acryloyloxy)pentane (stabilized with MEHQ)    
    
  Revision number:        6    

---

Section 2. HAZARDS IDENTIFICATION
  GHS classification
  PHYSICAL HAZARDS        Not classified    
  HEALTH HAZARDS
  Skin corrosion/irritation        Category 2    
    Category 2A
  Serious eye damage/eye irritation
  Skin sensitization        Category 1    
    Not classified
  ENVIRONMENTAL HAZARDS
  GHS label elements, including precautionary statements
  Pictograms or hazard symbols
  Signal word        Warning    
  Hazard statements        Causes skin irritation    
    Causes serious eye irritation
    May cause an allergic skin reaction
  Precautionary statements:
    Avoid breathing dust/fume/gas/mist/vapours/spray.
  [Prevention]
    Contaminated work clothing should not be allowed out of the workplace.
    Wash hands thoroughly after handling.
    Wear protective gloves/eye protection/face protection.
    IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
  [Response]
    if present and easy to do. Continue rinsing.
    If eye irritation persists: Get medical advice/attention.
    IF ON SKIN: Gently wash with plenty of soap and water.
    If skin irritation or rash occurs: Get medical advice/attention.
    Wash contaminated clothing before reuse.
  Other hazards which do not        May cause polimerization.    
  result in classification

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Substance/mixture:        Substance    
  Components:        1,5-Bis(acryloyloxy)pentane (stabilized with MEHQ)    
  Percent:        >97.0%(GC)    
    36840-85-4
  CAS Number:
  1,5-Bis(acryloyloxy)pentane (stabilized with
  MEHQ)

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
  Synonyms:        1,5-Pentanediol Diacrylate (stabilized with MEHQ) , Pentamethylene Glycol    
    Diacrylate (stabilized with MEHQ)
  Chemical Formula:        C11H16O4    

---

Section 4. FIRST AID MEASURES
  Inhalation:        Remove victim to fresh air and keep at rest in a position comfortable for breathing.    
    Get medical advice/attention if you feel unwell.
  Skin contact:        Remove/Take off immediately all contaminated clothing. Gently wash with plenty of    
    soap and water. If skin irritation or rash occurs: Get medical advice/attention.
  Eye contact:        Rinse cautiously with water for several minutes. Remove contact lenses, if present    
    and easy to do. Continue rinsing. If eye irritation persists: Get medical
    advice/attention.
  Ingestion:        Get medical advice/attention if you feel unwell. Rinse mouth.    
  Protection of first-aiders:        A rescuer should wear personal protective equipment, such as rubber gloves and air-    
    tight goggles.

---

Section 5. FIRE-FIGHTING MEASURES
    Dry chemical, foam, water spray, carbon dioxide.
  Suitable extinguishing
  media:
  Unsuitable extinguishing Solid streams of water
  media:
  Specific hazards arising This substance may polimerize explosively when heated or involved in a fire.
  from the chemical:        Container may explode when heated. Combat fire from a sheltered position.    
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
    method according to the surrounding situation is used. Uninvolved persons should
    evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
    spraying with water. Eliminate all ignition sources if safe to do so.
  Special protective        When extinguishing fire, be sure to wear personal protective equipment.    
  equipment for firefighters:

---

Section 6. ACCIDENTAL RELEASE MEASURES
  Personal precautions,        Use personal protective equipment. Keep people away from and upwind of spill/leak.    
  protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
  emergency procedures: around the leakage area by roping off, etc.
  Environmental precautions: Prevent product from entering drains.
  Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into a
  containment and cleaning covered container. In case of large amount of spillage, contain a spill by bunding.
  up: Adhered or collected material should be promptly disposed of, in accordance with
    appropriate laws and regulations.

---

Section 7. HANDLING AND STORAGE
  Precautions for safe handling
  Technical measures:        Handling is performed in a well ventilated place. Wear suitable protective equipment.    
    Prevent generation of vapour or mist. Wash hands and face thoroughly after
    handling.
    Use a ventilation, local exhaust if vapour or aerosol will be generated.
  Advice on safe handling: Avoid contact with skin, eyes and clothing.
  Conditions for safe storage, including any
  incompatibilities
  Storage conditions:        Keep container tightly closed. Store in a cool and dark place.    
    Store away from incompatible materials such as oxidizing agents.
  Packaging material:        Comply with laws.    
  1,5-Bis(acryloyloxy)pentane (stabilized with
  MEHQ)

---

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
  Engineering controls:        Install a closed system or local exhaust as possible so that workers should not be    
    exposed directly. Also install safety shower and eye bath.
  Personal protective equipment
  Respiratory protection: Vapor respirator. Follow local and national regulations.
  Hand protection:        Protective gloves.    
    Safety glasses. A face-shield, if the situation requires.
  Eye protection:
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
  Physical state (20°C):        Liquid    
    Clear
  Form:
  Colour:        Very pale yellow - Pale yellow    
    No data available
  Odour:
  pH: No data available
  Melting point/freezing point:No data available
  Boiling point/range:        95°C/0.01kPa    
  Flash point:        No data available    
  Flammability or explosive
  limits:
  Lower:        No data available    
  Upper:        No data available    
  Relative density:        1.04    
  Solubility(ies):
  [Water]        No data available    
  [Other solvents]
  Soluble:        Acetone    

---

Section 10. STABILITY AND REACTIVITY
  Chemical stability:        Polymerization may occur under the influences of heat, light or on contact with    
    polymelization initiators such as peroxides etc.
  Possibility of hazardous No special reactivity has been reported.
  reactions:
  Conditions to avoid:        Heat, Light    
  Incompatible materials: Oxidizing agents, Strong acids, Strong bases, Heavy metals
  Hazardous decomposition Carbon monoxide, Carbon dioxide
  products:

---

Section 11. TOXICOLOGICAL INFORMATION
  Acute Toxicity:        No data available    
  Skin corrosion/irritation: No data available
  Serious eye        No data available    
  damage/irritation:
  Germ cell mutagenicity: No data available
  Carcinogenicity:
  IARC =        No data available    
  NTP =        No data available    
  Reproductive toxicity:        No data available    

---

Section 12. ECOLOGICAL INFORMATION
  Ecotoxicity:
    No data available
  Fish:
  Crustacea:        No data available    
    No data available
  Algae:
  Persistence / degradability: No data available
    No data available
  Bioaccumulative
  potential(BCF):
  1,5-Bis(acryloyloxy)pentane (stabilized with
  MEHQ)

---

Section 12. ECOLOGICAL INFORMATION
  Mobility in soil
    No data available
  Log Pow:
  Soil adsorption (Koc):        No data available    
    No data available
  Henry's Law
  constant(PaM3/mol):

---

Section 13. DISPOSAL CONSIDERATIONS
    Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
    incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
    disposing of the substance.

---

Section 14. TRANSPORT INFORMATION
    Does not correspond to the classification standard of the United Nations
  Hazards Class:
  UN-No:        Not listed    

---

Section 15. REGULATORY INFORMATION
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
    loading and unloading were prescribed.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A