9,10-双(二乙基膦甲基)蒽

9,10-双(二乙基膦甲基)蒽 基本信息
CAS号 60974-92-7 分子式 C24H32O6P2
分子量 478.45500 精确质量  478.16700
PSA  90.68000 LogP  7.52520

基本信息 展开↓

CAS号:
60974-92-7
3D弹球模型:
立即前往扯扯看
分子式:
C24H32O6P2
分子量:
478.45500
中文名称:
9,10-双(二乙基膦甲基)蒽
英文名称:
9,10-Bis(diethylphosphonomethyl)anthracene
中文别名:
9,10-双(二乙基膦甲基)蒽;
9,10-双(二乙氧基膦酰甲基)蒽
英文别名:
9,10-Bis(diethylphosphonomethyl)anthracene;
9,10-bis(diethoxyphosphorylmethyl)anthracene
精确分子量/精确质量:
478.16700
极性分子表面积/PSA:
90.68000
油水分配系数/LogP:

LogP值指的是某物质在正辛醇/水两相体系中的分配系数的对数值,反映了物质在油水两相中的分配情况。其中、LogP值越大,说明该物质越亲油;反之,LogP值越小,则说明该物质越亲水。
InChI:
The Key: PKLFGXZSNISEOV-UHFFFAOYSA-N

物化性质展开↓

密度:
1.207g/cm3
沸点:
634.9ºC at 760 mmHg
闪点:
350.4ºC
折射率:
1.567
存储条件/存储方法:

在密封的贮藏器内,并放置阴凉,干燥的地方保存

稳定性相关:

避免接触氧化物

其它信息:

1.       性状:未确定

2.       密度(g/cm3 20 ºC ):未确定

3.       相对蒸汽密度(g/mL,空气=1):未确定

4.       熔点(ºC):未确定

5.       沸点(ºC12mmHg):未确定

6.       沸点(ºC,5.2kPa):未确定

7.       折射率(°):未确定

8.       闪点ºC3mmHg):未确定

9.       比旋光度(º):未确定

10.    自燃点或引燃温度(ºC):未确定

11.    蒸气压(kPa,25ºC):未确定

12.    饱和蒸气压(kPa,60ºC):未确定

13.    燃烧热(KJ/mol):未确定

14.    临界温度(ºC):未确定

15.    临界压力(KPa):未确定

16.    油水(辛醇/水)分配系数的对数值(25℃):未确定

17.    爆炸上限(%,V/V):未确定

18.    爆炸下限(%,V/V):未确定

19.    溶解性(mg/mL):水:未确定

 

安全信息展开↓

海关代码:
2916190090

合成路线查看所有的合成路线

  • 10387-13-0

    9,10-二(氯甲基)蒽

  • +

  • 122-52-1

    亚磷酸三乙酯

  • ~94%

  • 60974-92-7

    9,10-双(二乙基膦甲基)蒽

  • 78-40-0

    磷酸三乙酯(TEP)

  • +

  • 10387-13-0

    9,10-二(氯甲基)蒽

  • ~68%

  • 60974-92-7

    9,10-双(二乙基膦甲基)蒽

  • 34373-96-1

    1G;5G;10G;25G;500G

  • +

  • 122-52-1

    亚磷酸三乙酯

  • 60974-92-7

    9,10-双(二乙基膦甲基)蒽

毒理性展开↓

生态数据:

若无政府许可,勿将材料排入周围环境

MSDS 展开↓


Section I.Chemical Product and Company Identification
    Chemical Name 9,10-Bis(diethylphosphonomethyl)anthracene
    Portland OR
    Synonym        Phosphonic acid, P,P'-[9,10-anthracenediylbis    
    (methylene)]bis-, P,P,P',P'-tetraethyl ester (CA INDEX
    NAME);
    Tetraethyl [Anthracene-9,10-diylbis(methylene)]bisphos
    phonate; [Anthracene-9,10-diylbis(methylene)]bisphos
    phonic Acid Tetraethyl Ester
    Chemical Formula        C24H32O6P2    
    In case of        Chemtrec®    
    CAS Number        60974-92-7    

Section II.        Composition and Information on Ingredients    
    Toxicology Data
    Chemical Name        CAS Number Percent (%)        TLV/PEL    
    60974-92-7 Min. 98.0 (GC) Not available.        Not available.    
    9,10-Bis(diethylphosphonomethyl)anthracene

Section III. Hazards Identification
    Acute Health Effects        No specific information is available in our data base regarding the toxic effects of this material for humans. However,    
    exposure to any chemical should be kept to a minimum. Skin and eye contact may result in irritation. May be harmful if
    inhaled or ingested. Always follow safe industrial hygiene practices and wear proper protective equipment when handling
    this compound.
    Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.
    Chronic Health Effects        CARCINOGENIC EFFECTS : Not available.    
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.

Section IV.        First Aid Measures    
    Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15
    Eye Contact
    minutes. Get medical attention.
    Skin Contact        In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing    
    before reuse. Thoroughly clean shoes before reuse. Get medical attention.
    If the victim is not breathing, perform mouth-to-mouth resuscitation. Loosen tight clothing such as a collar, tie, belt or
    Inhalation
    waistband. If breathing is difficult, oxygen can be administered. Seek medical attention if respiration problems do not
    improve.
    Ingestion        INDUCE VOMITING by sticking finger in throat. Lower the head so that the vomit will not reenter the mouth and throat.    
    Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth
    resuscitation. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic
    material was ingested; the absence of such signs, however, is not conclusive.

Section V.        Fire and Explosion Data    
    Not available.
    May be combustible at high temperature.        Auto-Ignition    
    Flammability
    Flash Points        Flammable Limits        Not available.    
    Not available.
    These products are toxic carbon oxides (CO, CO2), phosphates.
    Combustion Products
    Fire Hazards
    Not available.
    Risks of explosion of the product in presence of mechanical impact: Not available.
    Explosion Hazards
    Risks of explosion of the product in presence of static discharge: Not available.
    Fire Fighting Media
    SMALL FIRE: Use DRY chemical powder.
    LARGE FIRE: Use water spray, fog or foam. DO NOT use water jet.
    and Instructions
    Consult with local fire authorities before attempting large scale fire-fighting operations.
    Continued on Next Page
    9,10-Bis(diethylphosphonomethyl)anthracene

Section VI.        Accidental Release Measures    
    Spill Cleanup        Use a shovel to put the material into a convenient waste disposal container. Finish cleaning the spill by rinsing any    
    contaminated surfaces with copious amounts of water. Consult federal, state, and/or local authorities for assistance on
    Instructions
    disposal.

Section VII. Handling and Storage
    Handling and Storage        Keep away from heat. Mechanical exhaust required. When not in use, tightly seal the container and store in a dry, cool    
    place. Avoid excessive heat and light. Do not breathe dust.
    Information
    Always store away from incompatible compounds such as oxidizing agents.

Section VIII. Exposure Controls/Personal Protection
    Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended
    Engineering Controls
    exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants
    below the exposure limit.
    Splash goggles. Lab coat. Dust respirator. Boots. Gloves. Suggested protective clothing might not be sufficient; consult a
    Personal Protection
    specialist BEFORE handling this product. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
    Exposure Limits        Not available.    

Section IX. Physical and Chemical Properties
    Solid. (yellow powder)        Solubility    
    Physical state @ 20°C        Soluble in toluene.    
    Not available.
    Specific Gravity
    478.45
    Molecular Weight        Partition Coefficient        Not available.    
    Boiling Point        Not available.        Vapor Pressure        Not applicable.    
    Not available.        Not available.    
    Melting Point        Vapor Density    
    Not available.        Volatility        Not available.    
    Refractive Index
    Not available.
    Critical Temperature        Not available.        Odor    
    Viscosity        Not available.        Taste        Not available.    

Section X.        Stability and Reactivity Data    
    Stability    
This material is stable if stored under proper conditions. (See Section VII for instructions)    
    Conditions of Instability        Avoid excessive heat and light.    
    Incompatibilities
    Reactive with oxidizing agents.

Section XI. Toxicological Information
    Not available.
    RTECS Number
    Routes of Exposure        Eye Contact. Ingestion. Inhalation.    
    Not available.
    Toxicity Data
    Chronic Toxic Effects        CARCINOGENIC EFFECTS : Not available.    
    MUTAGENIC EFFECTS : Not available.
    TERATOGENIC EFFECTS : Not available.
    DEVELOPMENTAL TOXICITY: Not available.
    Repeated or prolonged exposure to this compound is not known to aggravate existing medical conditions.
    Acute Toxic Effects        No specific information is available in our data base regarding the toxic effects of this material for humans. However,    
    exposure to any chemical should be kept to a minimum. Skin and eye contact may result in irritation. May be harmful if
    inhaled or ingested. Always follow safe industrial hygiene practices and wear proper protective equipment when handling this
    compound.
    Follow safe industrial hygiene practices and always wear proper protective equipment when handling this compound.

Section XII.        Ecological Information    
    Not available.
    Ecotoxicity
    Not available.
    Environmental Fate
    Continued on Next Page
    9,10-Bis(diethylphosphonomethyl)anthracene

Section XIII. Disposal Considerations
    Waste Disposal        Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a    
    combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all
    federal, state and local regulations when disposing of the substance.

Section XIV. Transport Information
    Not a DOT controlled material (United States).
    DOT Classification
    PIN Number        Not applicable.    
    Proper Shipping Name        Not applicable.    
    Packing Group (PG)        Not applicable.    
    DOT Pictograms

Section XV. Other Regulatory Information and Pictograms
    TSCA Chemical Inventory        This product is NOT on the EPA Toxic Substances Control Act (TSCA) inventory. The following notices are required by 40    
    CFR 720.36 (C) for those products not on the inventory list:
    (EPA)
    (i) These products are supplied solely for use in research and development by or under the supervision of a technically
    qualified individual as defined in 40 CFR 720.0 et sec.
    (ii) The health risks of these products have not been fully determined. Any information that is or becomes available will be
    supplied on an MSDS sheet.
    WHMIS Classification        Not controlled under WHMIS (Canada).    
    (Canada)
    EINECS Number (EEC)        Not available.    
    EEC Risk Statements        Not available.    


SECTION 16 - ADDITIONAL INFORMATION
N/A

海关数据查看详细

中国海关编码:2916190090

概述:
2916190090 其他不饱和无环一元羧酸(包括其酸酐、酰卤化物,过氧化物和过氧酸以及它们的衍生物)。监管条件:AB(入境货物通关单,出境货物通关单)。增值税率:17.0%。退税率:9.0%。最惠国关税:6.5%。普通关税:30.0%
申报要素:
品名, 成分含量, 用途, 丙烯酸、丙烯酸盐或酯应报明包装
监管条件:
A.入境货物通关单B.出境货物通关单
检验检疫:
R.进口食品卫生监督检验S.出口食品卫生监督检验M.进口商品检验N.出口商品检验
摘要/Summary:
2916190090 unsaturated acyclic monocarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their derivatives。supervision conditions:AB(certificate of inspection for goods inward,certificate of inspection for goods outward)。VAT:17.0%。tax rebate rate:9.0%。MFN tariff:6.5%。general tariff:30.0%

分子结构与计算化学数据展开↓

计算化学数据


1.疏水参数计算参考值(XlogP):4

2.氢键供体数量:0

3.氢键受体数量:6

4.可旋转化学键数量:12

5.互变异构体数量:无

6.拓扑分子极性表面积71.1

7.重原子数量:32

8.表面电荷:0

9.复杂度:571

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:1

上下游相关产品

上游产品

更多
  • 10387-13-0

    9,10-二(氯甲基)蒽

  • 122-52-1

    亚磷酸三乙酯

  • 120-12-7

  • 78-40-0

    磷酸三乙酯(TEP)

  • 34373-96-1

    1G5G10G25G500G

立即下载安装“化学加”APP
专业、功能强大,随时调用更加方便