---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
  Product identifiers
    Product name        : Methoxyacetaldehyde    
    : CDS019501
    REACH No.        : A registration number is not available for this substance as the substance    
    or its uses are exempted from registration, the annual tonnage does not
    require a registration or the registration is envisaged for a later
    registration deadline.
    CAS-No.        : 10312-83-1    
  

---

SECTION 2: Hazards identification
  Classification of the substance or mixture
  Classification according to Regulation (EC) No 1272/2008
    Flammable liquids (Category 2), H225
    Acute toxicity, Oral (Category 4), H302
    Acute toxicity, Dermal (Category 4), H312
    Eye irritation (Category 2), H319
    Skin sensitisation (Category 1), H317
    For the full text of the H-Statements mentioned in this Section, see Section 16.
  Classification according to EU Directives 67/548/EEC or 1999/45/EC
    Xn Harmful        R22, R36, R43    
    For the full text of the R-phrases mentioned in this Section, see Section 16.
  Label elements
  Labelling according Regulation (EC) No 1272/2008
    Pictogram
    Signal word        Danger    
    Hazard statement(s)
    Highly flammable liquid and vapour.
    H302 + H312        Harmful if swallowed or in contact with skin    
    May cause an allergic skin reaction.
    Causes serious eye irritation.
    Precautionary statement(s)
    Keep away from heat, hot surfaces, sparks, open flames and other
    ignition sources. No smoking.
    Wear protective gloves/ protective clothing.
    P305 + P351 + P338        IF IN EYES: Rinse cautiously with water for several minutes. Remove    
    contact lenses, if present and easy to do. Continue rinsing.
    Supplemental Hazard        none    
    Statements
  Other hazards
    This substance/mixture contains no components considered to be either persistent, bioaccumulative and
    toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
  Substances
    Formula        : C3H6O2    
    Molecular weight        : 74,08 g/mol    
    CAS-No.        : 10312-83-1    
    EC-No.        : 233-693-5    
  Hazardous ingredients according to Regulation (EC) No 1272/2008
    Component        Classification        Concentration    
  Methoxyacetaldehyde
    CAS-No.        10312-83-1        Flam. Liq. 2; Acute Tox. 4; Eye <= 100 %    
    EC-No.        233-693-5        Irrit. 2; Skin Sens. 1; H225,    
    H302 + H312, H317, H319
  Hazardous ingredients according to Directive 1999/45/EC
    Component        Classification        Concentration    
  Methoxyacetaldehyde
    CAS-No.        10312-83-1        Xn, R22 - R36 - R43        <= 100 %    
    EC-No.        233-693-5    
    For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
  Description of first aid measures
  General advice
    Consult a physician. Show this safety data sheet to the doctor in attendance.
  If inhaled
    If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
  In case of skin contact
    Wash off with soap and plenty of water. Consult a physician.
  In case of eye contact
    Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
  If swallowed
    Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
    water. Consult a physician.
  Most important symptoms and effects, both acute and delayed
    The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
    section 11
  Indication of any immediate medical attention and special treatment needed
    No data available

---

SECTION 5: Firefighting measures
  Extinguishing media
  Suitable extinguishing media
    Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
  Special hazards arising from the substance or mixture
    No data available
  Advice for firefighters
    Wear self-contained breathing apparatus for firefighting if necessary.
  Further information
    Use water spray to cool unopened containers.

---

SECTION 6: Accidental release measures
  Personal precautions, protective equipment and emergency procedures
    Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
    Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
    form explosive concentrations. Vapours can accumulate in low areas.
    For personal protection see section 8.
  Environmental precautions
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
  Methods and materials for containment and cleaning up
    Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
    place in container for disposal according to local regulations (see section 13).
  Reference to other sections
    For disposal see section 13.

---

SECTION 7: Handling and storage
  Precautions for safe handling
    Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
    Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
    charge.
    For precautions see section 2.2.
  Conditions for safe storage, including any incompatibilities
    Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
    opened must be carefully resealed and kept upright to prevent leakage.
    Storage class (TRGS 510): Flammable liquids
  Specific end use(s)
    Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
  Control parameters
  Components with workplace control parameters
  Exposure controls
  Appropriate engineering controls
    Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
    at the end of workday.
  Personal protective equipment
  Eye/face protection
    Face shield and safety glasses Use equipment for eye protection tested and approved under
    appropriate government standards such as NIOSH (US) or EN 166(EU).
  Skin protection
    Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
    (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
    contaminated gloves after use in accordance with applicable laws and good laboratory practices.
    Wash and dry hands.
    The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
    the standard EN 374 derived from it.
  Body Protection
    Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The
    type of protective equipment must be selected according to the concentration and amount of the
    dangerous substance at the specific workplace.
  Respiratory protection
    Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
    with multi-purpose combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup
    to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
    respirator. Use respirators and components tested and approved under appropriate government
    standards such as NIOSH (US) or CEN (EU).
  Control of environmental exposure
    Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
  Information on basic physical and chemical properties
    a) Appearance        Form: liquid    
    b) Odour        No data available    
    c) Odour Threshold        No data available    
    d) pH        No data available    
    e) Melting point/freezing        No data available    
    point
    f) Initial boiling point and No data available
    boiling range
    g) Flash point        No data available    
    h) Evaporation rate        No data available    
    i) Flammability (solid, gas) No data available
    j) Upper/lower        No data available    
    flammability or
    explosive limits
    k) Vapour pressure        No data available    
    l) Vapour density        No data available    
    m) Relative density        No data available    
    n) Water solubility        No data available    
    o) Partition coefficient: n- log Pow: -0,028
    octanol/water
    p) Auto-ignition        No data available    
    temperature
    q) Decomposition        No data available    
    temperature
    r) Viscosity        No data available    
    s) Explosive properties        No data available    
    t) Oxidizing properties        No data available    
  Other safety information
    No data available

---

SECTION 10: Stability and reactivity
  Reactivity
    No data available
  Chemical stability
    Stable under recommended storage conditions.
  Possibility of hazardous reactions
    No data available
  Conditions to avoid
    Heat, flames and sparks.
  Incompatible materials
    Strong oxidizing agents
  Hazardous decomposition products
    Other decomposition products - No data available
    In the event of fire: see section 5

---

SECTION 11: Toxicological information
  Information on toxicological effects
  Acute toxicity
    No data available
    LD50 Dermal - Rabbit - 1.170 mg/kg
  Skin corrosion/irritation
    No data available
  Serious eye damage/eye irritation
    No data available
  Respiratory or skin sensitisation
  Germ cell mutagenicity
    No data available
  Carcinogenicity
    IARC:        No component of this product present at levels greater than or equal to 0.1% is identified as    
    probable, possible or confirmed human carcinogen by IARC.
  Reproductive toxicity
    No data available
  Specific target organ toxicity - single exposure
    No data available
  Specific target organ toxicity - repeated exposure
    No data available
  Aspiration hazard
    No data available
  Additional Information
    RTECS: AB2940000
    To the best of our knowledge, the chemical, physical, and toxicological properties have not been
    thoroughly investigated.

---

SECTION 12: Ecological information
  Toxicity
    No data available
  Persistence and degradability
    No data available
  Bioaccumulative potential
    No data available
  Mobility in soil
    No data available
  Results of PBT and vPvB assessment
    This substance/mixture contains no components considered to be either persistent, bioaccumulative and
    toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
  Other adverse effects
    No data available

---

SECTION 13: Disposal considerations
  Waste treatment methods
  Product
    Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting
    as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal
    company.
  Contaminated packaging
    Dispose of as unused product.

---

SECTION 14: Transport information
  UN number
    ADR/RID: 1989        IMDG: 1989        IATA: 1989    
  UN proper shipping name
    ADR/RID: ALDEHYDES, N.O.S. (Methoxyacetaldehyde)
    IMDG: ALDEHYDES, N.O.S. (Methoxyacetaldehyde)
    IATA:        Aldehydes, n.o.s. (Methoxyacetaldehyde)    
  Transport hazard class(es)
    ADR/RID: 3        IMDG: 3        IATA: 3    
  Packaging group
    ADR/RID: II        IMDG: II        IATA: II    
  Environmental hazards
    ADR/RID: no        IMDG Marine pollutant: no        IATA: no    
  Special precautions for user
    No data available

---

SECTION 15: Regulatory information
    This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
  Safety, health and environmental regulations/legislation specific for the substance or mixture
    No data available
  Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A