1-氨基乙醇

1-氨基乙醇 基本信息
CAS号 75-39-8 分子式 C2H5NO
分子量 59.06720 精确质量 　59.03710
PSA 　43.09000 LogP 　-0.15570
充值推广 查看更多供应商
目录
基本信息 制备方法与用途 物化性质 安全信息 合成路线 化学图谱 MSDS 上下游

基本信息 展开↓

CAS号：
75-39-8
3D弹球模型：
立即前往扯扯看
分子式：
C2H5NO
分子量：
59.06720
中文名称：
1-氨基乙醇
英文名称：
acetaldehyde,azane
中文别名：
1-氨基乙醇;
1-胺乙醇;
胺乙醇
英文别名：
acetaldehyde,azane;
EINECS 200-868-2;
aminoethanol;
monoaminoethanol;
Ethanol,1-amino;
acetaldehyde ammonia;
1-aminoethanol;
Ethanol,1-amino-(8CI,9CI)
精确分子量/精确质量：
59.03710
极性分子表面积/PSA：
43.09000
油水分配系数/LogP：

LogP值指的是某物质在正辛醇/水两相体系中的分配系数的对数值，反映了物质在油水两相中的分配情况。其中、LogP值越大，说明该物质越亲油；反之，LogP值越小，则说明该物质越亲水。
EINECS：
200-868-2
InChI：
The Key: UJPKMTDFFUTLGM-UHFFFAOYSA-N

生产制备方法及用途展开↓

制备方法

由乙醛和氨缩合制得。

合成制备方法

由乙醛和氨缩合制得。

用途简介

用作橡胶丝的专用硫化促进剂,简称促进剂AA或AC。具有着色性,主要用于天然橡胶及丁苯橡胶。硫化后产品柔软,耐老化性优良。也用于有机合成。

用途

用作橡胶丝的专用硫化促进剂，简称促进剂AA或AC。具有着色性，主要用于天然橡胶及丁苯橡胶。硫化后产品柔软，耐老化性优良。也用于有机合成。

物化性质展开↓

密度：
0.967g/cm3
熔点：
95-97°C (dec.)
沸点：
109-111°C
闪点：
22.7ºC
折射率：
1.431
存储条件/存储方法：
库房通风低温干燥,与酸、氧化剂分开存放
其它信息：

1.       性状：无色结晶。

2.       密度（g/mL,25/4℃）： 未确定

3.       相对蒸汽密度（g/mL,空气=1）：未确定

4.       熔点（ºC）：95-97

5.       沸点（ºC,常压）：109-111

6.       沸点（ºC,5.2kPa）：未确定

7.       折射率：未确定

8.       闪点（ºC）：未确定

9.       比旋光度（º）：未确定

10.    自燃点或引燃温度（ºC）：未确定

11.    蒸气压（kPa,25ºC）：未确定

12.    饱和蒸气压（kPa,60ºC）：未确定

13.    燃烧热（KJ/mol）：未确定

14.    临界温度（ºC）：未确定

15.    临界压力（KPa）：未确定

16.    油水（辛醇/水）分配系数的对数值：未确定

17.    爆炸上限（%,V/V）：未确定

18.    爆炸下限（%,V/V）：未确定

    19.溶解性：溶解于水，微溶于醚。

安全信息展开↓

包装等级：
III
风险类别：
9
危险类别码：
R36/37/38
安全说明：
S26-S36/37/39
危险标志：
Xi

合成路线查看所有的合成路线

  • 75-07-0

    乙醛

  • →

  • 75-39-8

    1-氨基乙醇

化学图谱

  1. 1-氨基乙醇红外图谱(IR1)

  2. 1-氨基乙醇红外图谱(IR2)

  3. 1-氨基乙醇质谱(MS)

  4. 1-氨基乙醇核磁图(13CNMR)

上一页 1/4 下一页

MSDS 展开↓

Name: Acetaldehyde ammonia trimer 98% Material Safety Data Sheet
Synonym: Hexahydro-2,4,6-trimethyl-s-triazine trihydrat
CAS: 75-39-8
Section 1 - Chemical Product   MSDS Name:Acetaldehyde ammonia trimer 98% Material Safety Data Sheet
Synonym:Hexahydro-2,4,6-trimethyl-s-triazine trihydrat
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
75-39-8 Acetaldehyde ammonia trimer, 98% 98% 200-868-2
Hazard Symbols: XI
Risk Phrases: 36/37/38
Section 3 - HAZARDS IDENTIFICATION
  EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological properties of this material have not been fully investigated.Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.
Section 4 - FIRST AID MEASURES
  Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
  General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
  General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section.
Section 7 - HANDLING and STORAGE
  Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Avoid ingestion and inhalation. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
  Engineering Controls:
Good general ventilation should be sufficient to control airborne levels.
Exposure Limits CAS# 75-39-8: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
 
Physical State: Solid
Color: very slightly beige
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 110 deg C @ 760.00mm Hg
Freezing/Melting Point: 96 deg C
Autoignition Temperature: Not available.
Flash Point: 55 deg C ( 131.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H15N3.3H2O
Molecular Weight: 183.26
Section 10 - STABILITY AND REACTIVITY
  Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, contact with water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
  RTECS#:
CAS# 75-39-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Acetaldehyde ammonia trimer, 98% - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
 
Section 13 - DISPOSAL CONSIDERATIONS
  Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
 
IATA
Shipping Name: ACETALDEHYDE AMMONIA
Hazard Class: 9
UN Number: 1841
Packing Group: III
IMO
Shipping Name: ACETALDEHYDE AMMONIA
Hazard Class: 9
UN Number: 1841
Packing Group: III
RID/ADR
Not regulated as a hazardous material.
Section 15 - REGULATORY INFORMATION
 
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 75-39-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 75-39-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 75-39-8 is not listed on the TSCA inventory.
It is for research and development use only.

SECTION 16 - ADDITIONAL INFORMATION
N/A

上下游相关产品

上游产品

更多

  • 75-07-0

    乙醛

下游产品

更多

  • 109-11-5

    3-吗啉酮

立即下载安装“化学加”APP
专业、功能强大，随时调用更加方便
下载APP