六氟磷酸亚硝

六氟磷酸亚硝 基本信息
CAS号 16921-91-8 分子式 F6NOP
分子量 174.97000 精确质量  174.96200
PSA  37.38000 LogP  3.27868

基本信息 展开↓

CAS号:
16921-91-8
3D弹球模型:
立即前往扯扯看
分子式:
F6NOP
分子量:
174.97000
中文名称:
六氟磷酸亚硝
英文名称:
NITROSONIUM HEXAFLUOROPHOSPHATE
中文别名:
六氟磷酸亚硝;
六氟磷(V)酸亚硝离子
英文别名:
NITROSONIUM HEXAFLUOROPHOSPHATE;
Nitrosonium hexafluorophosphate;
azanylidyneoxidanium,hexafluorophosphate
精确分子量/精确质量:
174.96200
极性分子表面积/PSA:
37.38000
油水分配系数/LogP:

LogP值指的是某物质在正辛醇/水两相体系中的分配系数的对数值,反映了物质在油水两相中的分配情况。其中、LogP值越大,说明该物质越亲油;反之,LogP值越小,则说明该物质越亲水。
贝尔斯坦号/MDL:
MFCD00040324
EINECS:
240-980-9
InChI:
The Key: SAKPNYRUBHJGAR-UHFFFAOYSA-N

物化性质展开↓

外观与性状:
无色或白色晶体
存储条件/存储方法:

常温密闭避光,通风干燥惰性气体下

稳定性相关:

常温常压下稳定

避免的物料:水分/潮湿 酸

其它信息:

1. 性状:未确定

2. 密度(g/mL,25/4):未确定

3. 相对蒸汽密度(g/mL,空气=1未确定

4. 熔点(ºC):未确定

5. 沸点(ºC,常压):未确定

6. 沸点(ºC,5.2kPa): 未确定

7. 折射率: 未确定

8. 闪点(ºC): 未确定

9. 比旋光度(º): 未确定

10. 自燃点或引燃温度(ºC): 未确定

11. 蒸气压(kPa,25ºC): 未确定

12. 饱和蒸气压(kPa,60ºC): 未确定

13. 燃烧热(KJ/mol):未确定

14. 临界温度(ºC): 未确定

15. 临界压力(KPa): 未确定

16. 油水(辛醇/水)分配系数的对数值: 未确定

17. 爆炸上限(%,V/V):未确定

18. 爆炸下限(%,V/V): 未确定

19. 溶解性:未确定

安全信息展开↓

包装等级:
III
风险类别:
6.1
危险类别码:
R34
安全说明:
S45-S36/37/39-S26
安全标志:
S26:万一接触眼睛,立即使用大量清水冲洗并送医诊治。
S45:出现意外或者感到不适,立刻到医生那里寻求帮助(最好带去产品容器标签)。
:
危险标志:
C: Corrosive;T: Toxic;

合成路线查看所有的合成路线

  • 1087413-67-9

    nitrosylsulfuric acid fluoride

  • +

  • 12185-10-3

    黄磷

  • 16921-91-8

    六氟磷酸亚硝

  • 1087413-67-9

    nitrosylsulfuric acid fluoride

  • +

  • 7719-12-2

    三氯化磷

  • 16921-91-8

    六氟磷酸亚硝

  • +

  • 7446-09-5

    二氧化硫

  • +

  • 10102-43-9

    氧化亚氮

  • +

  • 2696-92-6

    亚硝酰氯

  • +

  • 7783-55-3

    trifluorophosphane

  • 16871-80-0

    antimony,nitric oxide,hexachloride

  • +

  • 558-32-7

    六氟磷酸四甲基铵

  • 16921-91-8

    六氟磷酸亚硝

毒理性展开↓

生态数据:

通常对水体是稍微有害的,不要将未稀释或大量产品接触地下水,水道或污水系统,未经政府许可勿将材料排入周围环境。

MSDS 展开↓


Section 1: Product Identification
   Chemical Name:       Nitrosonium hexafluorophosphate, min. 97%    
   CAS Registry Number:       16921-91-8    
   Formula:       NOPF6    
   EINECS Number:       240-980-9    
   Chemical Family:       metal fluorophosphate complex    
   Synonym:       Nitrosyl Tetrafluorophosphate    

Section 2: Composition and Information on Ingredients
   Ingredient       CAS Number       Percent       ACGIH (TWA)       OSHA (PEL)    
   Title Compound       16921-91-8       100%       2.5mg/m3 (as F)       2.5mg/m3 (as F)    

Section 3: Hazards Identification
   Corrosive to skin, eyes and respiratory tract. Ingestion causes damage to the mouth, throat and esophagus.
   Emergency Overview:
   May cause fluoride poisoning.
   Primary Routes of Exposure:       Contact with skin and eyes. Inhalation of dust and vapors.    
   Eye Contact:       Causes burns to the eyes. May cause blindness.    
   Skin Contact:       Causes burns with redness and pain. Effects may be delayed.    
   Causes burns to the respiratory tract. Nitrogen dioxide can cause tachycardia, chest pain, and pulmonary
   Inhalation:
   edema.
   Ingestion:       Ingestion causes damage to the mouth, throat and esophagus.    
   Corrosive to eyes, skin, respiratory tract and gastrointestinal tract. Fluoride poisoning may cause nausea,
   Acute Health Affects:
   vomiting, diarrhea, weakness, coma, respiratory failure and cardiovascular collapse.
   Chronic Health Affects:       Prolonged exposure to hydrolysable fluorine compounds can cause deterioration of bone and tooth structure.    
   NTP:       No    
   IARC:       No    
   OSHA:       No    

SECTION 4: First Aid Measures
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Eye Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need
   Skin Exposure:
   assistance in keeping their eye lids open. Get immediate medical attention.
   Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty
   Inhalation:
   in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance.
   Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce
   Ingestion:
   vomiting only if directed by medical personnel.

SECTION 5: Fire Fighting Measures
   Flash Point:       not applicable    
   Autoignition Temperature:       not applicable    
   Explosion Limits:       not applicable    
   Extinguishing Medium:       none required    
   Fire fighters should be equipped with a NIOSH approved positive pressure self-contained breathing apparatus
   Special Fire Fighting Procedures:
   and full protective clothing.
   Hazardous Combustion and       If involved in a fire this material may emit corrosive fluorophosphoric acid.    
   Decomposion Products:
   Unusual Fire or Explosion Hazards: May act as an oxygen source in a fire. May liberate pressurizing gas if strongly heated.

SECTION 6: Accidental Release Measures
   Small spills should be covered with calcium carbonate or limestone, and swept up, or flushed with water and
   Spill and Leak Procedures:
   sponged up.

SECTION 7: Handling and Storage
   Store in a tightly sealed container. Keep away from heat, moisture and direct sunlight. If moisture is present,
   Handling and Storage:
   glass storage bottle may become etched.

SECTION 8: Exposure Controls and Personal Protection
   Eye Protection:       Always wear approved safety glasses when handling a chemical substance in the laboratory.    
   Skin Protection:       Wear protective clothing and gloves. Consult with glove manufacturer to determine the proper type of glove.    
   Ventilation:       Material may form a toxic fine dust. If possible, handle the material in an efficient fume hood.    
   In the absence of adequate ventilation a respirator should be worn. The use of a respirator requires a
   Respirator:
   Respirator Protection Program to be in compliance with 29 CFR 1910.134.
   Ventilation:       Material may form a toxic fine dust. If possible, handle the material in an efficient fume hood.    
   Additional Protection:       No additional protection required.    

SECTION 9: Physical and Chemical Properties
   Color and Form:       white xtl.    
   Molecular Weight:       174.96    
   Melting Point:       no data    
   Boiling Point:       no data    
   Vapor Pressure:       no data    
   Specific Gravity:       no data    
   Odor:       none    
   Solubility in Water:       decomposes in water    

SECTION 10: Stability and Reactivity
   Stability:       moisture sensitive    
   Hazardous Polymerization:       no hazardous polymerization    
   Conditions to Avoid:       Exposure to water.    
   Incompatibility:       mineral acids, oxidizing agents and active metals    
   Decomposition Products:       nitrogen oxides, hydrogen fluoride, and phosphorous oxides.    

SECTION 11: Toxicological Information
   RTECS Data:       No information available in the RTECS files.    
   Carcinogenic Effects:       no information available    
   Mutagenic Effects:       no information available    
   Tetratogenic Effects:       no information available    

SECTION 12: Ecological Information
   Ecological Information:       no information available    

SECTION 13: Disposal Considerations
   Disposal:       Dispose of according to federal, state, and local regulations.    

SECTION 14: Transportation
   Shipping Name (CFR):       Corrosive solids, N.O.S.    
   Hazard Class (CFR):       8    
   Additional Hazard Class (CFR):       NA    
   Packaging Group (CFR):       II    
   UN ID Number (CFR):       UN# 1759    
   Shipping Name (IATA):       Corrosive solid, N.O.S.    
   Hazard Class (IATA):       8    
   Additional Hazard Class (IATA):       NA    
   Packaging Group (IATA):       II    
   UN ID Number (IATA):       UN# 1759    

SECTION 15: Regulatory Information
   TSCA:       Listed in the TSCA inventory.    
   SARA (Title 313):       Title compound not listed.    
   Second Ingredient:       none    


SECTION 16 - ADDITIONAL INFORMATION
N/A

分子结构与计算化学数据展开↓

计算化学数据


1.疏水参数计算参考值(XlogP):无

2.氢键供体数量:0

3.氢键受体数量:8

4.可旋转化学键数量:0

5.互变异构体数量:无

6.拓扑分子极性表面积24.8

7.重原子数量:9

8.表面电荷:0

9.复杂度:72.7

10.同位素原子数量:0

11.确定原子立构中心数量:0

12.不确定原子立构中心数量:0

13.确定化学键立构中心数量:0

14.不确定化学键立构中心数量:0

15.共价键单元数量:2

上下游相关产品

上游产品

更多
  • 12185-10-3

    黄磷

  • 1087413-67-9

    nitrosylsulfuric acid fluoride

  • 7719-12-2

    三氯化磷

  • 10026-13-8

    五氯化磷

  • 7664-39-3

    氢氟酸

下游产品

更多
  • 558-32-7

    六氟磷酸四甲基铵

  • 38834-26-3

    carbon monoxide,cyclopenta-1,3-diene,iron(6+),hexafluorophosphate

立即下载安装“化学加”APP
专业、功能强大,随时调用更加方便